LM747QML_16 Datasheet, PDF (6/10 Pages) Texas Instruments – LM747QML Dual Operational Amplifier

PACKAGE OPTION ADDENDUM
www.ti.com
10-Aug-2016
PACKAGING INFORMATION
Orderable Device
LM747 MD8
LM747 MW8
LM747H/883
Status Package Type Package Pins Package Eco Plan
(1)
Drawing
Qty
(2)
ACTIVE DIESALE
Y
0
456 Green (RoHS
& no Sb/Br)
ACTIVE WAFERSALE YS
0
TBD
ACTIVE TO-100
LME 10
20
TBD
Lead/Ball Finish
(6)
Call TI
Call TI
Call TI
LM747J/883
ACTIVE
CDIP
J
14
25
TBD
Call TI
MSL Peak Temp
(3)
Level-1-NA-UNLIM
Op Temp (°C)
-55 to 125
Call TI
Call TI
-55 to 125
-55 to 125
Call TI
-55 to 125
Device Marking
(4/5)
LM747H/883 Q ACO
LM747H/883 Q >T
LM747J/883 Q
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
(4) _{There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.}
(5) _{Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation}
of the previous line and the two combined represent the entire Device Marking for that device.
(6) _{Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish}
value exceeds the maximum column width.
Samples
Addendum-Page 1