BQ27620-G1 Datasheet, PDF (6/45 Pages) Texas Instruments – System-Side Impedance Track™ Fuel Gauge

bq27620-G1
SLUSAE3 – OCTOBER 2012
3.4 DIGITAL INPUT AND OUTPUT DC CHARACTERISTICS
T_A = –40°C to 85°C, typical values at T_A = 25°C and V_REGIN = 3.6 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
Output voltage, low (SCL, SDA,
V_OL
SOC_INT , BAT_LOW ,
I_OL = 3 mA
BAT_GD )
V_OH(PP)
Output voltage, high
(BAT_LOW , BAT_GD )
I_OH = –1 mA
V_CC –
0.5
V_OH(OD)
V_IL
Output voltage, high (SDA,
SCL, SOC_INT )
Input voltage, low (SDA, SCL
pins)
Input voltage, low ( BI/TOUT
pin)
External pullup resistor connected to
V_CC
BAT INSERT CHECK MODE active
V_CC –
0.5
–0.3
–0.3
Input voltage, high (SDA, SCL
1.2
pins)
V_IH
Input voltage, high ( BI/TOUT
pin)
BAT INSERT CHECK MODE active
1.2
V_IL(CE)
V_IH(CE)
Input voltage, low (CE pin)
Input voltage, high (CE pin)
V_REGIN = 2.8 to 4.5V
V_REGIN –
0.5
I_lkg
Input leakage current (I/O pins)
(1)
(1) Specified by design. Not production tested.
3.5 POWER-ON RESET
T_A = –40°C to 85°C, typical values at T_A = 25°C and V_REGIN = 3.6 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
V_IT+
V_HYS
Positive-going battery voltage
input at V_CC
Power-on reset hysteresis
2.05
45
www.ti.com
TYP
MAX UNIT
0.4 V
V
0.6
V
0.6
V
V_CC +
0.3
0.8
V
0.3 μA
TYP
MAX UNIT
2.15
2.20 V
115
185 mV
3.6 2.5V LDO REGULATOR
T_A = –40°C to 85°C, C_LDO25 = 1μF, V_REGIN = 3.6V (unless otherwise noted)
PARAMETER
TEST CONDITION
V_REG25
Regulator output voltage
2.8V ≤ V_REGIN ≤ 4.5V, I_OUT ≤ 16mA
2.45V ≤ V_REGIN < 2.8V (low battery),
I_OUT ≤ 3mA
MIN
NOM
MAX UNIT
2.3
2.5
2.6 V
2.3
V
3.7 INTERNAL CLOCK OSCILLATORS
T_A = –40°C to 85°C, 2.4 V < V_CC < 2.6 V; typical values at T_A = 25°C and V_CC = 2.5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
f_OSC
f_LOSC
High Frequency Oscillator
Low Frequency Oscillator
2.097
32.768
UNIT
MHz
kHz
6
ELECTRICAL SPECIFICATIONS
Submit Documentation Feedback
Product Folder Links: bq27620-G1
Copyright © 2012, Texas Instruments Incorporated