TMS320C54X_16 Datasheet, PDF (58/118 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS

TMS320C54x, TMS320LC54x, TMS320VC54x
FIXED-POINT DIGITAL SIGNAL PROCESSORS
SPRS039C – FEBRUARY 1996 – REVISED DECEMBER 1999
electrical characteristics and operating conditions — ’C541, ’C542 (continued)
electrical characteristics over recommended operating case temperature range (unless otherwise
noted)
VOH
VOL
IIZ
PARAMETER
High-level output voltage‡
Low-level output voltage‡
Input current in high impedance
TRST
Input current
II
(VI = VSS to VDD)
HPIENA
TMS, TCK, TDI, HPI||
D[15:0], HD[7:0]
All other input-only pins
IDDC Supply current, core CPU
IDDP Supply current, pins
IDD Supply current, standby
IDLE2
IDLE3
TEST CONDITIONS
IOH = –300 µA
IOL = 2 mA
VDD = MAX,
VI = VSS to VDD
With internal pulldown
With internal pulldown, RS = 0
With internal pullups
Bus holders enabled, VDD = MAX^k
VDD = 5 V, fx = 40 MHz,§ TC = 25°C
VDD = 5 V, fx = 40 MHz,§ TC = 25°C
PLL × 1 mode, 40 MHz input
Divide-by-two mode, CLKIN stopped
MIN TYP†
2.4
–20
–10
–10
–500
–150
–10
47¶
18#
4
5
MAX
0.6
20
800
400
10
250
10
UNIT
V
V
µA
µA
µA
mA
mA
mA
µA
Ci
Input capacitance
10
pF
Co Output capacitance
10
pF
† _{All typical values are at VDD = 5 V, TC = 25°C.}
‡ _{All input and output voltage levels except RS, INT0 – INT3, NMI, CNT, X2/CLKIN, CLKMD0 – CLKMD3 are TTL-compatible.}
§ _{Clock mode: PLL × 1 with external source}
¶ _{This value was obtained with 50% usage of MAC and 50% usage of NOP instructions. Actual operating current varies with program being}
executed.
# _{This value was obtained with single-cycle external writes, CLKOFF = 0 and load = 15 pF. For more details on how this calculation is performed,}
refer to the Calculation of TMS320C54x Power Dissipation application report (literature number SPRA164).
|| _{HPI input signals except for HPIENA.}
kVIL(MIN) ≤ VI ≤ VIL(MAX) or VIH(MIN) ≤ VI ≤ VIH(MAX)
58
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443