English
Language : 

TCA6507_16 Datasheet, PDF (5/45 Pages) Texas Instruments – Low-Voltage 7-Bit I2C and SMBus LED Driver
www.ti.com
TCA6507
SCPS164C – MAY 2007 – REVISED JANUARY 2016
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
VCC Supply voltage
VI
Input voltage(2)
VO
Output voltage(2)
IIK
Input clamp current
IOK Output clamp current
IOL
Continuous output low current
Continuous current through GND
ICC
Continuous current through VCC
Tstg Storage temperature
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
SCL, EN
P port, SDA
P port
SDA
MIN
MAX UNIT
–0.5
4.6
V
–0.5
6.5
V
6.5
V
±20
mA
±20
mA
50
mA
25
250
mA
20
–65
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
6.2 ESD Ratings
V(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
Charged-device model (CDM), per JEDEC specification JESD22-
C101 (2)
VALUE
±2000
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage of I2C registers, oscillator, and control logic
VIH High-level input voltage
SCL, SDA, EN
1.65 V ≤ VCC ≤ 1.95 V
1.96 V ≤ VCC ≤ 3.6 V
VIL Low-level input voltage
SCL, SDA, EN
1.65 V ≤ VCC ≤ 1.95 V
1.96 V ≤ VCC ≤ 3.6 V
VO Output voltage
IOL Low-level output current (1)
TA Operating free-air temperature
(1) The total current sourced by the P port must be limited to 200 mA.
MIN
1.65
1.3
0.7 × VCC
–0.5
–0.5
0
–40
NOM
MAX
3.6
3.6
3.6
0.3
0.3 × VCC
5.5
40
85
UNIT
V
V
V
V
mA
°C
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: TCA6507
Submit Documentation Feedback
5