TALP1000B Datasheet, PDF (5/6 Pages) Texas Instruments – Dual-Axis Analog MEMS Pointing Mirror

Not Recommended For New Designs
TALP1000B
www.ti.com ..................................................................................................................................... SLBS006A – NOVEMBER 2004 – REVISED SEPTEMBER 2009
DEVICE INFORMATION
Mirror SIde
3.2 mm x 3.6 mm elliptical
Mirror Surface rotatable in
two axis
6X R0.813±0.050
12.83
6X 0.50
9.83
9.652±0.150
8.43
4.83
6.10
1.52±0.05
Coil Side
1.23
0
3.18
1.638±0.050
Hole for a
1.5875 mm Max
Diameter Location Pin
4.06
Minimum
Coil Clearance
0.76
Minimum Surface
Clearance Outside
Coil Clearance
2
2.54
Minimum Clearance
from Mirror Side Surface
for Mirror Rotation
0.70
Minimum Clearance
from Mirror Side Surface
for Mounted Components
2.258±0.075
Mirror Surface
to Coil Side
0.734±0.025
Mirror Surface
to Mirror Side
8.89
Minimum
Coil Clearance
4
0
12
4.83
3X 3.30 Mounting Surface
for Mirror and Coil Sides
PIN ONE
Sullins 12-Pin Connector
P/N PRPN062PAEN or Equivalent
(2 mm Pin spacing)
NOTES:
1) All dimensions in mm.
2) Tolerances (Unless Otherwise Specified)
.XX +/- 0.25
.XXX +/- 0.13
Copyright © 2004–2009, Texas Instruments Incorporated
Product Folder Link(s): TALP1000B
Submit Documentation Feedback
5