English
Language : 

OPA211_15 Datasheet, PDF (5/45 Pages) Texas Instruments – Low Power, Precision Operational Amplifier
◁
www.ti.com
OPA211, OPA2211
SBOS377H – OCTOBER 2006 – REVISED NOVEMBER 2015
OPA2211 DRG Package
8-Pin SON With Exposed Thermal Pad
Top View
OPA2211 DDA Package
8-Pin SO PowerPAD With Exposed Thermal Pad
Top View
NAME
+IN A
–IN A
+IN B
–IN B
OUT A
OUT B
V+
V–
Pad
OUT A 1
8 V+
–IN A 2
A
7 OUT B
+IN A 3
6 –IN B
B
V– 4
5 +IN B
OUT A 1
–IN A 2
+IN A 3
V– 4
A
B
8 V+
7 OUT B
6 –IN B
5 +IN B
Pad
Pad
PIN
NO.
3
2
5
6
1
7
8
4
—
Pin Functions—OPA2211
I/O
DESCRIPTION
I
Noninverting input channel A
I
Inverting input channel A
I
Noninverting input channel B
I
Inverting input channel B
O
Output channel A
O
Output channel B
I
Positive power supply
I
Negative power supply
—
Exposed thermal die pad on underside; connect thermal die pad to V–. Soldering the thermal
pad improves heat dissipation and provides specified performance.
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature (unless otherwise noted).(1)
Supply voltage, VS = (V+) – (V–)
Input voltage
Input current (any pin except power-supply pins)
Output short-circuit(2)
Operating temperature, TA
Junction temperature, TJ
Storage temperature, Tstg
MIN
MAX
40
(V–) – 0.5
(V+) + 0.5
±10
Continuous
–55
150
200
–65
150
UNIT
V
V
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Short-circuit to VS/2 (ground in symmetrical dual supply setups), one amplifier per package.
7.2 ESD Ratings
V(ESD)
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1)
Charged-device model (CDM), per JEDEC specification JESD22-C101, all pins(2)
VALUE
3000
1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
V
Copyright © 2006–2015, Texas Instruments Incorporated
Product Folder Links: OPA211 OPA2211
Submit Documentation Feedback
5
 ▷