|
OPA211_15 Datasheet, PDF (1/45 Pages) Texas Instruments – Low Power, Precision Operational Amplifier | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
OPA211, OPA2211
SBOS377H â OCTOBER 2006 â REVISED NOVEMBER 2015
OPA2x11 1.1-nv/âHz Noise, Low Power, Precision Operational Amplifier
1 Features
â¢1 Low Voltage Noise: 1.1 nV/âHz at 1 kHz
⢠Input Voltage Noise: 80 nVPP (0.1 to 10 Hz)
⢠THD + N: â136 dB (G = 1, Æ = 1 kHz)
⢠Offset Voltage: 125 μV (Maximum)
⢠Offset Voltage Drift: 0.35 μV/°C (Typical)
⢠Low Supply Current: 3.6 mA/Ch (Typical)
⢠Unity-Gain Stable
⢠Gain Bandwidth Product:
â 80 MHz (G = 100)
â 45 MHz (G = 1)
⢠Slew Rate: 27 V/μs
⢠16-Bit Settling: 700 ns
⢠Wide Supply Range: ±2.25 to ±18 V, 4.5 to 36 V
⢠Rail-to-Rail Output
⢠Output Current: 30 mA
⢠SON-8 (3 mm à 3 mm), VSSOP-8, and SOIC-8
2 Applications
⢠PLL Loop Filters
⢠Low-Noise, Low-Power Signal Processing
⢠16-Bit ADC Drivers
⢠DAC Output Amplifiers
⢠Active Filters
⢠Low-Noise Instrumentation Amps
⢠Ultrasound Amplifiers
⢠Professional Audio Preamplifiers
⢠Low-Noise Frequency Synthesizers
⢠Infrared Detector Amplifiers
⢠Hydrophone Amplifiers
⢠Geophone Amplifiers
⢠Medical
3 Description
The OPA211 series of precision operational
amplifiers achieves very low 1.1-nV/âHz noise density
with a supply current of only 3.6 mA. This series also
offers rail-to-rail output swing, which maximizes
dynamic range.
The extremely low voltage and low current noise,
high-speed, and wide output swing of the OPA211
series make these devices an excellent choice as a
loop filter amplifier in PLL applications.
In precision data acquisition applications, the
OPA211 series of operational amplifiers provides
700-ns settling time to 16-bit accuracy throughout 10-
V output swings. This ac performance, combined with
only 125 μV of offset and 0.35 μV/°C of drift over
temperature, makes the OPA211 ideal for driving
high-precision 16-bit analog-to-digital converters
(ADCs) or buffering the output of high-resolution
digital-to-analog converters (DACs).
The OPA211 series is specified over a wide dual-
power supply range of ±2.25 to ±18 V, or for single-
supply operation from 4.5 to 36 V.
The OPA211 is available in the small SON-8 (3 mm Ã
3 mm), VSSOP-8, and SOIC-8 packages. A dual
version, the OPA2211, is available in the SON-8 (3
mm à 3 mm) or an SO-8 PowerPAD⢠package. This
series of operational amplifiers is specified from TA =
â40°C to +125°C.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm à 3.90 mm
OPA211
SON (8)
3.00 mm à 3.00 mm
VSSOP (8)
3.00 mm à 3.00 mm
OPA2211
SON (8)
3.00 mm à 3.00 mm
SO PowerPAD (8) 4.90 mm à 3.90 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Input Voltage Noise Density vs Frequency
100
10
1
0.1
1
10
100
1k
10k
100k
Frequency (Hz)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.
|
▷ |