LMH2110 Datasheet, PDF (5/33 Pages) National Semiconductor (TI) – 8 GHz Logarithmic RMS Power Detector with 45 dB Dynamic Range

LMH2110
www.ti.com
SNWS022C – JANUARY 2010 – REVISED MARCH 2013
2.7V and 4.5V DC and AC Electrical Characteristics (continued)
Unless otherwise specified: all limits are ensured to; T_A = 25°C, V_BAT = 2.7V and 4.5V (worst of the 2 is specified), RF_IN =
1900 MHz CW (Continuous Wave, unmodulated). Boldface limits apply at the temperature extremes ⁽¹⁾.
Symbol
Parameter
Condition
Min
(2)
Typ
(3)
Max
(2)
Units
DR
Dynamic Range for specified
±1 dB Log Conformance Error (E_LC)
accuracy
±3 dB Log Conformance Error (E_LC)
±0.5 dB Input referred Variation over
Temperature (E_VOT), from P_MIN
±0.3 dB Error for a 1dB Step (E_{1dB STEP})
±1 dB Error for a 10dB Step (E_10dB
STEP⁾
E_MOD
Input referred Variation due to
Modulation
W-CDMA Release 6/7/8, -38
dBm<RF_IN<-5 dBm
LTE, -38 dBm<RF_IN<-5 dBm
RF_IN = 3500 MHz, fit range -15 dBm to -5 dBm ⁽⁵⁾
P_MIN
Minimum Power level, bottom end Log Conformance Error within ±1 dB
of dynamic range
P_MAX
Maximum Power level, top end of
dynamic range
V_MIN
V_MAX
K_SLOPE
P_INT
DR
Minimum Output Voltage
Maximum Output Voltage
Logarithmic Slope
Logarithmic Intercept
Dynamic Range for specified
accuracy
At P_MIN
At P_MAX
±1 dB Log Conformance Error (E_LC)
±3 dB Log Conformance Error (E_LC)
±0.5 dB Input referred Variation over
Temperature (E_VOT), from P_MIN
RF_IN = 5800 MHz, fit range -20 dBm to 3 dBm ⁽⁶⁾
P_MIN
Minimum Power level, bottom end Log Conformance Error within ±1 dB
of dynamic range
P_MAX
Maximum Power level, top end of
dynamic range
V_MIN
V_MAX
K_SLOPE
P_INT
DR
Minimum Output Voltage
Maximum Output Voltage
Logarithmic Slope
Logarithmic Intercept
Dynamic Range for specified
accuracy
At P_MIN
At P_MAX
±1 dB Log Conformance Error (E_LC)
±3 dB Log Conformance Error (E_LC)
±0.5 dB Input referred Variation over
Temperature (E_VOT), from P_MIN
41.8
-30.5
42.5
-22.0
36
36
45
43
41
40
38
30
0.09
0.18
-31
6
2
1.52
44.0
-29.7
37
36
44
42
39
-22
10
3
1.34
44.8
-21.0
32
31
39
37
33
dB
dB
dBm
46.1
-28.8
mV
V
mV/dB
dBm
dB
dBm
47.1
-19.9
mV
V
mV/dB
dBm
dB
(6) All limits are specified by design and measurements which are performed on a limited number of samples. Limits represent the mean
±3–sigma values. The typical value represents the statistical mean value.
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: LMH2110
Submit Documentation Feedback
5