LM3S1435_16 Datasheet, PDF (409/670 Pages) Texas Instruments – Stellaris LM3S1435 Microcontroller

Stellaris^® LM3S1435 Microcontroller
Register 11: ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0),
offset 0x040
This register defines the analog input configuration for each sample in a sequence executed with
Sample Sequencer 0. This register is 32 bits wide and contains information for eight possible
samples.
ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0)
Base 0x4003.8000
Offset 0x040
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
reserved
MUX7
reserved
MUX6
reserved
Type RO
RO
RO
R/W
RO
RO
RO
R/W
RO
RO
RO
Reset
0
0
0
0
0
0
0
0
0
0
0
15
14
13
reserved
Type RO
RO
RO
Reset
0
0
0
12
MUX3
R/W
0
11
10
9
reserved
RO
RO
RO
0
0
0
8
MUX2
R/W
0
7
6
5
reserved
RO
RO
RO
0
0
0
20
MUX5
R/W
0
4
MUX1
R/W
0
19
18
17
reserved
RO
RO
RO
0
0
0
3
2
1
reserved
RO
RO
RO
0
0
0
16
MUX4
R/W
0
0
MUX0
R/W
0
Bit/Field
31:29
28
27:25
24
23:21
20
19:17
Name
reserved
MUX7
reserved
MUX6
reserved
MUX5
reserved
Type
RO
R/W
RO
R/W
RO
R/W
RO
Reset
0
0x0
0
0x0
0
0x0
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
8th Sample Input Select
The MUX7 field is used during the eighth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion. The value set here indicates
the corresponding pin, for example, a value of 1 indicates the input is
ADC1.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
7th Sample Input Select
The MUX6 field is used during the seventh sample of a sequence
executed with the sample sequencer. It specifies which of the analog
inputs is sampled for the analog-to-digital conversion.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
6th Sample Input Select
The MUX5 field is used during the sixth sample of a sequence executed
with the sample sequencer. It specifies which of the analog inputs is
sampled for the analog-to-digital conversion.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
July 15, 2014
409
Texas Instruments-Production Data