TS3USB3000_15 Datasheet, PDF (4/26 Pages) Texas Instruments – DPDT USB 2.0 High-Speed and Mobile High-Definition Link Switch

TS3USB3000
SCDS337B – DECEMBER 2012 – REVISED DECEMBER 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)^{(1) (2)}
V_CC
V_I/O
V_D-
V_I
I_K
I_IK
I_CC
I_GND
T_stg
Supply voltage⁽³⁾
Input/Output DC voltage⁽³⁾
D- DC voltage⁽⁴⁾
Digital input voltage (SEL, /OE)
Input/Output port diode current
Digital logic input clamp current⁽³⁾
Continuous current through VCC
Continuous current through GND
Storage temperature
VI/O < 0
VI < 0
MIN
–0.3
–0.3
–0.3
–0.3
–50
–50
–100
–65
MAX
5.5
5.5
9
5.5
100
150
UNIT
V
V
V
V
mA
mA
mA
mA
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(3) All voltages are with respect to ground, unless otherwise specified.
(4) This rating only applies to the D- pin with respect to GND. VCC must be powered within the recommended operating conditions of 2.7 V
to 4.3 V and the /OE pin must be logic high for this rating to be applicable. Any condition where VCC is unpowered or the /OE pin is not
high must reference the rest of the Absolute Maximum Ratings Table.
6.2 ESD Ratings
V_(ESD)
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾
VALUE
±3500
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
V_CC
V_{I/O (USB)}
V_{I/O (MHL)}
V_I
T_RAMP (V_CC)
T_A
Supply voltage
Analog voltage
Digital input voltage (SEL, OE)
Power supply ramp time requirement (V_CC)
Operating free-air temperature
MIN MAX UNIT
2.7 4.3 V
0 3.6 V
0 V_CC V
100 1000 μs/V
-40
85 ºC
4
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated
Product Folder Links: TS3USB3000