TS3USB3000_15 Datasheet, PDF (1/26 Pages) Texas Instruments – DPDT USB 2.0 High-Speed and Mobile High-Definition Link Switch

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TS3USB3000
SCDS337B – DECEMBER 2012 – REVISED DECEMBER 2015
TS3USB3000 DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) 6.1-GHz
Switch
1 Features
•1 V_CC Range 2.7 V to 4.3 V
• Mobile Hi-Definition Link (MHL) Switch:
– Bandwidth (–3 dB): 6.1 GHz
– R_ON (Typical): 5.7 Ω
– C_ON (Typical): 1.6 pF
• USB Switch:
– Bandwidth (–3 dB): 6.1 GHz
– R_ON (Typical): 4.6 Ω
– C_ON (Typical): 1.4 pF
• Current Consumption: 30 µA (Typical)
• Special Features:
– I_OFF Protection Prevents Current Leakage in
Powered-Down State (V_CC and V_BUS = 0 V)
– 1.8-V Compatible Control Inputs (SEL, OE)
– Overvoltage Tolerance (OVT) on all I/O Pins
up to 5.5 V Without External Components
– Overvoltage Protection When 9 V Short to
D-Pin
• ESD Performance:
– 3.5-kV Human Body Model (A114B, Class II)
– 1-kV Charged-Device Model (C101)
• 10-Pin UQFN Package (2.0 mm × 1.5 mm,
0.5 mm Pitch)
2 Applications
• Smartphones, Tablets, Mobile
• Portable Instrumentation
• Digital Still Cameras
3 Description
The TS3USB3000 device is a double-pole, double
throw (DPDT) multiplexer that includes a high-speed
Mobile High-Definition Link (MHL) switch and an USB
2.0 High-Speed (480 Mbps) switch in the same
package. These configurations allow the system
designer to use a common USB or Mico-USB
connector for both MHL video signals and USB data.
The TS3USB3000 has a V_CC range of 2.7 V to 4.3 V
and supports overvoltage tolerance (OVT) feature,
which allows the I/O pins to withstand overvoltage
conditions (up to 5.5 V). The power-off protection
feature forces all I/O pins to be in high-impedance
mode when power is not present, allowing full
isolation of the signal lines under such condition
without excessive leakage current. The select pins of
TS3USB3000 are compatible with 1.8-V control
voltage, allowing them to be directly interfaced with
the General-Purpose I/O (GPIO) from a mobile
processor.
The TS3USB3000 comes with a small 10-pin UQFN
package with only 2.0 mm × 1.5 mm is size, which
makes it a perfect candidate to be used in mobile
applications.
Device Information ⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TS3USB3000
UQFN (10)
1.50 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Functional Block Diagram
TS3USB3000
USB+
D+
MHL+
D-
USB-
MHL-
SEL
Control
Logic
/OE
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.