TLC7701MDREP Datasheet, PDF (4/18 Pages) Texas Instruments – MICROPOWER SUPPLY VOLTAGE SUPERVISORS

TLC7701-EP, TLC7705-EP, TLC7733-EP
SGLS013E – MARCH 2003 – REVISED NOVEMBER 2011
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_DD Supply voltage⁽²⁾
Input voltage range, CONTROL, RESIN, SENSE ⁽²⁾
VALUE
7
-0.3 to 7
UNIT
V
V
I_OL Maximum low output current
I_OH Maximum high output current
I_IK Input clamp current, (V_I < 0 or V_I > V_DD)
I_OK Output clamp current, (V_O < 0 or V_O > V_DD)
T_A Operating free-air temperature range
TL77xxQ
TL77xxM
10
mA
10
mA
±10
mA
±10
mA
-40 to 125
°C
-55 to 125
T_stg Storage temperature range
-65 to 150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND.
THERMAL INFORMATION
THERMAL METRIC⁽¹⁾
TLC77xx-EP
D
TLC77xx-EP
PW
UNITS
8 PINS
8 PINS
θ_JA
Junction-to-ambient thermal resistance
θ_JC
Junction-to-case thermal resistance
θ_JB
Junction-to-board thermal resistance
ψ_JT
Junction-to-top characterization parameter
ψ_JB
Junction-to-board characterization parameter
97.1
168
39.4
38.9
-
96.6
°C/W
-
1.5
-
94.7
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
RECOMMENDED OPERATING CONDITIONS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_DD
V_I
V_IH
V_IL
I_OH
I_OL
Δt/ΔV
T_A
Supply voltage
Input voltage
High-level input voltage at RESIN and CONTROL⁽²⁾
Low-level input voltage at RESIN and CONTROL
High-level output current, V_DD ≥ 2.7 V
Low-level output current, V_DD ≥ 2.7 V
Input transition rise and fall rate at RESIN and CONTROL
Operating free-air temperature range
Q temperature range
M temperature range
MIN
2
0
0.7×V_DD
-40
-55
NOM
MAX
6
V_DD
0.2×V_DD
-2
2
100
125
125
UNIT
V
V
V
V
mA
mA
ns/V
°C
(1) Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.
(2) To ensure a low supply current, V_IL should be kept <0.3 V and V_IH > -0.3 V.
4
Submit Documentation Feedback
Copyright © 2003–2011, Texas Instruments Incorporated
Product Folder Link(s): TLC7701-EP TLC7705-EP TLC7733-EP