TLC7701MDREP Datasheet, PDF (1/18 Pages) Texas Instruments – MICROPOWER SUPPLY VOLTAGE SUPERVISORS

TLC7701-EP, TLC7705-EP, TLC7733-EP
www.ti.com
SGLS013E – MARCH 2003 – REVISED NOVEMBER 2011
MICROPOWER SUPPLY VOLTAGE SUPERVISORS
Check for Samples: TLC7701-EP, TLC7705-EP, TLC7733-EP
FEATURES
1
• Power-On Reset Generator
• Automatic Reset Generation After Voltage
Drop
• Precision Voltage Sensor
• Temperature-Compensated Voltage Reference
• Programmable Delay Time by External
Capacitor
• Supply Voltage Range . . . 2 V to 6 V
• Defined RESET Output from V_DD ≥ 1 V
• Power-Down Control Support for Static RAM
With Battery Backup
• Maximum Supply Current of 16 mA
• Power Saving Totem-Pole Outputs
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
• Available in Extended (–40°C/125°C
and –55°C/125°C), Temperature Ranges⁽¹⁾
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
(1) Additional temperature ranges available - contact factory
D OR PW PACKAGE
(TOP VIEW)
CONTROL 1
RESIN 2
CT 3
GND 4
8 V_DD
7 SENSE
6 RESET
5 RESET
DESCRIPTION
The TLC77xx family of micropower supply voltage supervisors provide reset control, primarily in microcomputer
and microprocessor systems.
During power-on, RESET is asserted when V_DD reaches 1 V. After minimum V_DD (≥ 2 V) is established, the
circuit monitors SENSE voltage and keeps the reset outputs active as long as SENSE voltage (V_I(SENSE)) remains
below the threshold voltage. An internal timer delays return of the output to the inactive state to ensure proper
system reset. The delay time (t_d) is determined by an external capacitor:
t_d = 2.1 × 10⁴ × C_T
(1)
Where
C_T is in farads
t_d is in seconds
Except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed sense
threshold voltage set by an internal voltage divider. When SENSE voltage drops below the threshold voltage, the
outputs become active and stay in that state until SENSE voltage returns above threshold voltage and the delay
time (t_d) has expired.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2011, Texas Instruments Incorporated