SN75LVDS84_08 Datasheet, PDF (4/17 Pages) Texas Instruments – FLATLINK TRANSMITTERS

SN75LVDS84
SLLS270D – MARCH 1997 – REVISED NOVEMBER 2007
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
V_CC
Supply voltage range⁽²⁾
V_O
Output voltage range (all terminals)
V_I
Input voltage range (all terminals)
Continuous total power dissipation
T_stg
Storage temperature range
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
VALUE
–0.5 to 4
–0.5 to V_CC + 0.5
–0.5 to 5.5
See Dissipation Rating Table
–6 to 150
260
UNIT
V
V
°C
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to the GND terminals.
PACKAGE
DGG
DISSIPATION RATINGS
T_A ≤ 25°C
POWER RATING
1316 mW
DERATING FACTOR⁽¹⁾
ABOVE T_A = 25°C
13.1 mW/°C
T_A = 70°C
POWER RATING
726 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board mounted and with no air
flow.
RECOMMENDED OPERATING CONDITIONS
V_CC
Supply voltage
V_IH
High-level input voltage
V_IL
Low-level input voltage
Z_L
Differential load impedance
T_A
Operating free-air temperature
MIN NOM MAX UNIT
3
3.3 3.6 V
2
V
0.8 V
90
132 Ω
0
70 °C
TIMING REQUIREMENTS
PARAMETER
t_c
Input clock period
t_w Pulse duration, high-level input clock
t_t
Transition time, input signal
t_su Setup time, data, D0–D27 valid before CLKIN↓ (See Figure 2)
t_h Hold time, data, D0–D27 valid after CLKIN↓ (See Figure 2)
MIN
14.7
0.4 t_c
3
1.5
TYP MAX UNIT
32.4 ns
0.6 t_c ns
5 ns
ns
ns
4
Submit Documentation Feedback
Copyright © 1997–2007, Texas Instruments Incorporated
Product Folder Link(s) :SN75LVDS84