OPA2694ID Datasheet, PDF (4/28 Pages) Texas Instruments – Dual, Wideband, Low-Power, Current Feedback Operational Amplifier

OPA2694
SBOS320D − SEPTEMBER 2004 − REVISED APRIL 2013
www.ti.com
ELECTRICAL CHARACTERISTICS: V_S = ±5V (continued)
Boldface limits are tested at +25°C. At R_F = 402Ω, R_L = 100Ω, and G = +2V/V, unless otherwise noted.
PARAMETER
POWER SUPPLY
Specified Operating Voltage
Maximum Operating Voltage Range
Minimum Operating Voltage Range
Maximum Quiescent Current
Minimum Quiescent Current
Power-Supply Rejection Ratio (PSRR)
THERMAL CHARACTERISTICS
Specification: ID
Thermal Resistance q_JA
D
SO-8
CONDITIONS
V_S = ±5V, Both Channels
V_S = ±5V, Both Channels
Input-Referred
Junction-to-Ambient
TYP
+25°C
OPA2694ID
MIN/MAX OVER TEMPERATURE
+25°C⁽¹⁾
0°C to
70°C⁽²⁾
−40°C to
+85°C⁽²⁾
UNITS
MIN/ TEST
MAX LEVEL⁽³⁾
±5
V
typ
C
—
±6.3
±6.3
±6.3
V
max
A
—
±3.5
±3.5
±3.5
mA
max
B
11.6
12.1
12.5
12.7
mA
max
A
11.6
11.1
10.5
9.9
mA
min
A
58
53
51
49
dB
min
A
−40 to +85
—
125
°C
typ
C
—
—
—
°C/W
typ
C
(1) _{Junction temperature = ambient for +25°C specifications.}
(2) _{Junction temperature = ambient at low temperature limits; junction temperature = ambient +15°C at high temperature limit for over temperature specifications.}
(3) _{Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and simulation. (C) Typical}
value only for information.
(4) _{Current is considered positive out of node. VCM is the input common-mode voltage.}
(5) _{Tested < 3dB below minimum specified CMRR at ±CMIR limits.}
4