LP2981-N_16 Datasheet, PDF (4/30 Pages) Texas Instruments – Micropower 100-mA Ultralow Dropout Regulator

LP2981-N
SNOS773N – MARCH 2000 – REVISED APRIL 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾
Operating junction temperature
Power dissipation⁽³⁾
Input supply voltage (survival)
Input supply voltage (operating)
Shutdown input voltage (survival)
Output voltage (survival)⁽⁴⁾
I_OUT (survival)
Input-output voltage (survival)⁽⁵⁾
Storage temperature
MIN
MAX
−40
125
Internally limited
−0.3
16
2.1
16
−0.3
16
−0.3
9
Short-circuit protected
−0.3
16
–65
150
UNIT
°C
V
V
V
V
V
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) If Military/Aerospace-specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) The maximum allowable power dissipation is a function of the maximum junction temperature, T_J(MAX), the junction-to-ambient thermal
resistance, R_θJA, and the ambient temperature, T_A. The maximum allowable power dissipation at any ambient temperature is calculated
using P_(MAX) = (T_J(MAX) – T_A) / R_θJA. The value of R_θJA for the SOT-23 package is 175.7°C/W. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown.
(4) If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2980-N output must be diode-clamped
to ground.
(5) The output PNP structure contains a diode between the IN and OUT pins that is normally reverse-biased. Reversing the polarity from
V_IN to V_OUT will turn on this diode (See Reverse Current Path).
6.2 ESD Ratings
V_(ESD)
Electrostatic
discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾ Pins 1, 2 and 5
Pins 3 and 4
VALUE
±2000
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Operating junction temperature
Input supply voltage (operating)
MIN
MAX UNIT
−40
125
°C
2.1
16
V
4
Submit Documentation Feedback
Product Folder Links: LP2981-N
Copyright © 2000–2016, Texas Instruments Incorporated