LMH6574 Datasheet, PDF (4/27 Pages) National Semiconductor (TI) – 4:1 High Speed Video Multiplexer

LMH6574
SNCS103D – NOVEMBER 2004 – REVISED DECEMBER 2014
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V⁺ − V^−)
I_OUT ⁽³⁾
Signal & Logic Input Pin Voltage
Signal & Logic Input Pin Current
Maximum Junction Temperature
Storage Temperature
Soldering Information
Infrared or Convection (20 sec)
Wave Soldering (10 sec)
MIN
MAX
UNIT
13.2
V
130
mA
±(V_S+0.6)
V
±20
mA
+150
°C
−65
+150
°C
235
°C
260
°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics ±5V tables
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) The maximum output current (I_OUT) is determined by the device power dissipation limitations (The junction temperature cannot be
allowed to exceed 150°C). See the Power Dissipation for more details. A short circuit condition should be limited to 5 seconds or less.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge⁽¹⁾
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽²⁾
Machine model (MM)
VALUE
±2000
±200
UNIT
V
(1) Human Body model, 1.5 kΩ in series with 100 pF. Machine model, 0 Ω In series with 200 pF.
(2) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 2000-V HBM is possible with the necessary precautions. Pins listed as ±200 V may actually have higher performance.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Operating Temperature
Supply Voltage
MIN
NOM
MAX UNIT
−40
85
°C
6
12
V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics ±5V tables
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
D
14 PINS
UNIT
R_θJA
R_θJC(top)
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
130
°C/W
40
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
4
Submit Documentation Feedback
Product Folder Links: LMH6574
Copyright © 2004–2014, Texas Instruments Incorporated