LMC6482QML_16 Datasheet, PDF (4/29 Pages) Texas Instruments – LMC6482QML CMOS Dual Rail-To-Rail Input and Output Operational Amplifier

LMC6482QML
SNOSAR9A – DECEMBER 2010 – REVISED MARCH 2013
www.ti.com
LMC6482 Electrical Characteristics DC Parameters (continued)
The following conditions apply, unless otherwise specified. V⁺ = 5V, V^− = 0V, V_CM = V_O = V⁺/2 and R_L > 1M.
Symbol
Parameter
Conditions
Notes
Min Max Units
R_L = 2KΩ Sourcing
R_L = 2KΩ Sinking
A_V
Large Signal Voltage Gain
R_L = 600Ω Sourcing
R_L = 600Ω Sinking
See ⁽²⁾
140
See ⁽²⁾
84
See ⁽²⁾
35
See ⁽²⁾
20
See ⁽²⁾
80
See ⁽²⁾
48
See ⁽²⁾
18
See ⁽²⁾
13
V/mV
V/mV
V/mV
V/mV
V/mV
V/mV
V/mV
V/mV
Sub-
groups
4
5, 6
4
5, 6
4
5, 6
4
5, 6
(2) V⁺ = 15V, V_CM = 7.5V and R_L connected to 7.5V. For Sourcing tests, 7.5V ≤ V_O ≤ 11.5V. For Sinking tests, 3.5V ≤ V_O ≤ 7.5V.
LMC6482 Electrical Characteristics AC Parameters
The following conditions apply, unless otherwise specified. V⁺ = 5V, V^− = 0V, V_CM = V_O = V⁺/2 and R_L > 1M.
Symbol
Parameter
Conditions
Notes Min Max Units
SR
GBW
Slew Rate
Gain Bandwidth
V⁺ = 15V
Set up for non-inverting
See ⁽¹⁾
See ⁽¹⁾
0.9
0.6
1.25
1.15
V/µS
V/µS
MHz
MHz
Sub-
groups
4
5, 6
4
5, 6
(1) V⁺ = 15V. Connected as Voltage Follower with 10V step input, 2.5V to 12.5V for +slew, and 12.5V to 2.5V for −slew.. Number specified
is the slower of either the positive or negative slew rates.
4
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: LMC6482QML