LM36010 Datasheet, PDF (4/37 Pages) Texas Instruments – Synchronous-Boost, Single-LED Flash Driver With 1.5-A High-Side Current Source

LM36010
SNVSAN4A – APRIL 2017 – REVISED JULY 2017
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾
MIN
MAX
IN, SW, OUT, LED
−0.3
6
SDA, SCL, STROBE
Continuous power dissipation⁽³⁾
−0.3
(V_IN+ 0.3) w/ 6 V maximum
Internally limited
Junction temperature, T_J-MAX
Storage temperature, T_stg
150
−65
150
UNIT
V
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to the potential at the GND pin.
(3) Internal thermal shutdown circuitry protects the device from permanent damage. Thermal shutdown engages at T_J = 150°C (typical) and
disengages at T_J = 135°C (typical). Thermal shutdown is ensured by design.
6.2 ESD Ratings
V_(ESD)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾
VALUE
±1000
±250
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾
V_IN
Junction temperature, T_J
Ambient temperature, T_A ⁽³⁾
MIN
MAX
UNIT
2.5
5.5
V
−40
125
°C
−40
85
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to the potential at the GND pin.
(3) In applications where high power dissipation and/or poor package thermal resistance is present, the maximum ambient temperature may
have to be derated. Maximum ambient temperature (T_A-MAX) is dependent on the maximum operating junction temperature (T_J-MAX-OP =
125°C), the maximum power dissipation of the device in the application (P_D-MAX), and the junction-to-ambient thermal resistance of the
part/package in the application (R_θJA), as given by the following equation: T_A-MAX = T_J-MAX-OP – (R_θJA × P_D-MAX).
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LM36010
YKB (DSBGA)
UNIT
8 PINS
R_θJA
R_θJC(top)
R_θJB
Ψ_JT
Ψ_JB
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
117.3
1.3
34.3
0.5
34.6
°C/W
°C/W
°C/W
°C/W
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
4
Submit Documentation Feedback
Product Folder Links: LM36010
Copyright © 2017, Texas Instruments Incorporated