CC2530F32_17 Datasheet, PDF (4/36 Pages) Texas Instruments – A True System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee Applications

CC2530F32, CC2530F64
CC2530F128, CC2530F256
SWRS081B – APRIL 2009 – REVISED FEBRUARY 2011
www.ti.com
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply voltage All supply pins must have the same voltage
Voltage on any digital pin
Input RF level
Storage temperature range
ESD ⁽²⁾
All pads, according to human-body model, JEDEC STD 22, method A114
According to charged-device model, JEDEC STD 22, method C101
MIN
MAX UNIT
–0.3
3.9 V
–0.3 VDD + 0.3,
≤ 3.9
V
10 dBm
–40
125 °C
2 kV
500 V
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) CAUTION: ESD sensitive device. Precaution should be used when handling the device in order to prevent permanent damage.
RECOMMENDED OPERATING CONDITIONS
Operating ambient temperature range, T_A
Operating supply voltage
MIN MAX UNIT
–40
125 °C
2
3.6 V
ELECTRICAL CHARACTERISTICS
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and VDD = 3 V, unless otherwise noted.
Boldface limits apply over the entire operating range, T_A = –40°C to 125°C, VDD = 2 V to 3.6 V, and f_c = 2394 MHz to
2507 MHz.
PARAMETER
TEST CONDITIONS
Digital regulator on. 16-MHz RCOSC running. No radio, crystals, or peripherals active.
Medium CPU activity: normal flash access⁽¹⁾, no RAM access
32-MHz XOSC running. No radio or peripherals active.
Medium CPU activity: normal flash access⁽¹⁾, no RAM access
32-MHz XOSC running, radio in RX mode, –50-dBm input power, no peripherals active, CPU
idle
I_core
Core current
consumption
32-MHz XOSC running, radio in RX mode at -100-dBm input power (waiting for signal), no
peripherals active, CPU idle
32-MHz XOSC running, radio in TX mode, 1-dBm output power, no peripherals active, CPU idle
32-MHz XOSC running, radio in TX mode, 4.5-dBm output power, no peripherals active, CPU
idle
Power mode 1. Digital regulator on; 16-MHz RCOSC and 32-MHz crystal oscillator off;
32.768-kHz XOSC, POR, BOD and sleep timer active; RAM and register retention
Power mode 2. Digital regulator off; 16-MHz RCOSC and 32-MHz crystal oscillator off;
32.768-kHz XOSC, POR, and sleep timer active; RAM and register retention
Power mode 3. Digital regulator off; no clocks; POR active; RAM and register retention
Peripheral Current Consumption (Adds to core current I_core for each peripheral unit activated)
Timer 1
Timer running, 32-MHz XOSC used
Timer 2
Timer running, 32-MHz XOSC used
Timer 3
Timer running, 32-MHz XOSC used
I_peri
Timer 4
Sleep timer
Timer running, 32-MHz XOSC used
Including 32.753-kHz RCOSC
ADC
When converting
Flash
Erase
Burst write peak current
MIN TYP MAX UNIT
3.4
mA
6.5 8.9 mA
20.5
mA
24.3 29.6 mA
28.7
mA
33.5 39.6 mA
0.2 0.3 mA
1
2 μA
0.4
1 μA
90
μA
90
μA
60
μA
70
μA
0.6
μA
1.2
mA
1
mA
6
mA
(1) Normal flash access means that the code used exceeds the cache storage, so cache misses happen frequently.
GENERAL CHARACTERISTICS
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and VDD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
WAKE-UP AND TIMING
4
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated
Product Folder Link(s): CC2530F32 CC2530F64 CC2530F128 CC2530F256