MSP430F249-EP_014 Datasheet, PDF (33/81 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F249-EP
MIXED SIGNAL MICROCONTROLLER
2008
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted) (continued)
SVS (supply voltage supervisor/monitor)
PARAMETER
TEST CONDITIONS
MIN TYP
MAX UNIT
t_(SVSR)
t_d(SVSon)
t_settle
V_(SVSstart)
V_{hys(SVS_IT−)}
dV_CC/dt > 30 V/ms (see Figure 12)
dV_CC/dt ≤ 30 V/ms
SVSON, switch from VLD = 0 to VLD ≠ 0, V_CC = 3 V
VLD ≠ 0^‡
VLD ≠ 0, V_CC/dt ≤ 3 V/s (see Figure 12)
V_CC/dt ≤ 3 V/s (see Figure 12)
V_CC/dt ≤ 3 V/s (see Figure 12), External voltage applied
on A7
VLD = 1
VLD = 2 to 14
VLD = 15
5
20
70
0.001 x
V_{(SVS_IT−)}
4.4
1.55
120
150
μs
2000
150 μs
12 μs
1.7 V
210 mV
0.016 x
V_{(SVS_IT−)}
20 mV
VLD = 1
1.8 1.9
2.05
VLD = 2
1.94 2.1
2.25
VLD = 3
2.05 2.2
2.37
VLD = 4
2.14 2.3
2.48
VLD = 5
2.24 2.4
2.6
VLD = 6
2.33 2.5
2.71
V_{(SVS_IT−)}
V_CC/dt ≤ 3 V/s (see Figure 12 and Figure 13)
VLD = 7
VLD = 8
VLD = 9
2.46 2.65
2.58 2.8
2.69 2.9
2.86
3V
3.13
VLD = 10
2.83 3.05
3.29
VLD = 11
2.94 3.2
3.42
VLD = 12
3.11 3.35
3.61^†
VLD = 13
3.24 3.5
3.76^†
VLD = 14
3.43 3.7^†
3.99^†
V_CC/dt ≤ 3 V/s (see Figure 12 and Figure 13), External
voltage applied on A7
VLD = 15
1.1 1.2
1.3
I_CC(SVS)§
VLD ≠ 0, V_CC = 2.2 V/3 V
10
15 μA
† _{The recommended operating voltage range is limited to 3.6 V.}
‡ _{tsettle is the settling time that the comparator output must have a stable level after VLD is switched VLD ≠ 0 to a different VLD value somewhere}
between 2 and 15. The overdrive is assumed to be >50 mV.
§ _{The current consumption of the SVS module is not included in the ICC current consumption data.}
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
33