TLC27L4_14 Datasheet, PDF (32/43 Pages) Texas Instruments – LinCMOSE PRECISION QUAD OPERATIONAL AMPLIFIERS

TLC27L4, TLC27L4A, TLC27L4B, TLC27L4Y, TLC27L9
LinCMOS™ PRECISION QUAD OPERATIONAL AMPLIFIERS
SLOS053C – OCTOBER 1987 – REVISED AUGUST 1994
APPLICATION INFORMATION
noise performance (continued)
VI
VI
VO
VO
VO
VI
(a) NONINVERTING AMPLIFIER
(b) INVERTING AMPLIFIER
Figure 40. Guard-Ring Schemes
(c) UNITY-GAIN AMPLIFIER
output characteristics
The output stage of the TLC27L4 and TLC27L9 is designed to sink and source relatively high amounts of current
(see typical characteristics). If the output is subjected to a short-circuit condition, this high current capability can
cause device damage under certain conditions. Output current capability increases with supply voltage.
All operating characteristics of the TLC27L4 and TLC27L9 were measured using a 20-pF load. The devices
drive higher capacitive loads; however, as output load capacitance increases, the resulting response pole
occurs at lower frequencies, thereby causing ringing, peaking, or even oscillation (see Figure 41). In many
cases, adding a small amount of resistance in series with the load capacitance alleviates the problem.
(a) CL = 20 pF, RL = NO LOAD
(b) CL = 260 pF, RL = NO LOAD
2.5 V
VO
VI
CL
TA = 25°C
f = 1 kHz
VIPP = 1 V
– 2.5 V
(c) CL = 310 pF, RL = NO LOAD
(d) TEST CIRCUIT
Figure 41. Effect of Capacitive Loads and Test Circuit
32
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265