DRV5032_17 Datasheet, PDF (31/33 Pages) Texas Instruments – Ultra-Low-Power Digital-Switch Hall Effect Sensor

DMR0004A
EXAMPLE BOARD LAYOUT
X2SON - 0.4 mm max height
PLASTIC SMALL OUTLINE - NO LEAD
4X (0.22)
1
4X (0.4)
2X (0.5)
4
(R0.05) TYP
5
(0.6)
SYMM
(1.4)
( 0.2) VIA
2 _SYMM 3
(0.8)
LAND PATTERN EXAMPLE
SCALE:35X
0.05 MAX
ALL AROUND
METAL
0.05 MIN
ALL AROUND
SOLDER MASK
OPENING
SOLDER MASK
OPENING
NON SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
SOLDER MASK
DEFINED
METAL UNDER
SOLDER MASK
NOTES: (continued)
4222825/A 03/2016
4. This package is designed to be soldered to a thermal pad on the board. For more information, see Texas Instruments literature
number SLUA271 (www.ti.com/lit/slua271).
5. Vias are optional depending on application, refer to device data sheet. If all or some are implemented, recommended via locations are shown.
It is recommended that vias under paste be filled, plugged or tented.
www.ti.com