PCM1690-Q1 Datasheet, PDF (30/46 Pages) Texas Instruments – 24-Bit, 192-kHz Sampling, Enhanced Multi-Level ΔΣ,Eight-Channel Audio Digital-to-Analog Converter

PCM1690-Q1
SBAS551 – JUNE 2011
www.ti.com
DEC
66
HEX
42
B7
OPEDA3
B6
OPEDA2
B5
OPEDA1
B4
OPEDA0
B3
FLT3
B2
FLT2
B1
FLT1
B0
FLT0
OPEDA[3:0] Operation control
These bits control the DAC operation mode. In operation disable mode, the DAC output is cut off
from DIN and the internal DAC data are reset. If PSMDA = 1, the DAC output is forced into
VCOM. IF PSMDA = 0, the DAC output is forced into AGND and the DAC goes into a
power-down state. For normal operating mode, these bits must be '0'. The serial mode control is
effective during operation disable mode.
Default value: 0000.
OPEDA Operation control
xxx0 DAC1/2 normal operation
xxx1 DAC1/2 operation disable with or without power save
xx0x DAC3/4 normal operation
xx1x DAC3/4 operation disable with or without power save
x0xx DAC5/6 normal operation
x1xx DAC5/6 operation disable with or without power save
0xxx DAC7/8 normal operation
1xxx DAC7/8 operation disable with or without power save
FLT[3:0]
Digital filter roll-off control
These bits allow users to select the digital filter roll-off that is best suited to their applications.
Sharp and slow filter roll-off selections are available. The filter responses for these selections are
shown in the Typical Characteristics section of this data sheet.
Default value: 0000.
FLT
Digital filter roll-off control
xxx0 DAC1/2 sharp roll-off
xxx1 DAC1/2 slow roll-off
xx0x DAC3/4 sharp roll-off
xx1x DAC3/4 slow roll-off
x0xx DAC5/6 sharp roll-off
x1xx DAC5/6 slow roll-off
0xxx DAC7/8 sharp roll-off
1xxx DAC7/8 slow roll-off
30
Copyright © 2011, Texas Instruments Incorporated