MSP430F2619S-HT_14 Datasheet, PDF (30/93 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2619S-HT
SLAS697D – MARCH 2010 – REVISED OCTOBER 2013
Active-Mode Current vs DCO Frequency (continued)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
T_A
–55°C
V_CC
MIN TYP
–40°C
25°C
2.2 V
125°C
Active Mode Current Supply
f_SMCLK = f_DCO = 16 MHz
150°C
–55°C
–40°C
25°C
3V
125°C
150°C
www.ti.com
MAX
5.46
5.58
5.89
6.03
6.20
7.14
7.14
7.21
7.429
7.54
UNIT
mA
Low-Power-Mode
Characteristics ⁽¹⁾
Supply
(2)
Currents
Into
AV_CC
Excluding
External
Current
–
Electrical
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
I_{LPM0, 1MHz}
Low-power mode 0
(LPM0) current⁽³⁾
TEST CONDITIONS
f_MCLK = 0 MHz,
f_SMCLK = f_DCO = 1 MHz,
f_ACLK = 32,768 Hz,
BCSCTL1 = CALBC1_1 MHZ,
DCOCTL = CALDCO_1 MHZ,
CPUOFF = 1, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
T_A
–55°C to 85°C
105°C
150°C
–55°C to 85°C
105°C
150°C
V_CC
2.2 V
3V
MIN TYP MAX
68 83
83 98
210
87 105
100 125
240
I_{LPM0, 100kHz}
Low-power mode 0
(LPM0) current⁽³⁾
f_MCLK = 0 MHz,
f_SMCLK = f_{DCO(0, 0)} ≉ 100 kHz,
f_ACLK = 0 Hz,
RSELx = 0, DCOx = 0,
CPUOFF = 1, SCG0 = 0, SCG1 = 0,
OSCOFF = 1
–55°C to 85°C
105°C
150°C
–55°C to 85°C
105°C
150°C
2.2 V
3V
37 49
50 62
160
40 55
57 73
185
I_LPM2
Low-power mode 2
(LPM2) current⁽⁴⁾
f_MCLK = f_SMCLK = 0 MHz, f_DCO = 1 MHz,
f_ACLK = 32,768 Hz,
BCSCTL1 = CALBC1_1 MHZ,
DCOCTL = CALDCO_1 MHZ,
CPUOFF = 1, SCG0 = 0, SCG1 = 1,
OSCOFF = 0
–55°C to 85°C
105°C
150°C
–55°C to 85°C
105°C
150°C
2.2 V
3V
23 33
35 46
148
25 36
40 55
168
–55°C
0.8 1.2
I_LPM3,LFXT1
Low-power mode 3
(LPM3) current⁽⁴⁾
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
f_ACLK = 32,768 Hz,
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
OSCOFF = 0
25°C
85°C
105°C
–55°C
25°C
85°C
2.2 V
3V
1 1.3
4.6
7
14 24
0.9 1.3
1.1 1.5
5.5
8
105°C
17 30
UNIT
μA
μA
μA
μA
(1) All inputs are tied to 0 V or V_CC. Outputs do not source or sink any current.
(2) The currents are characterized with a Micro Crystal CC4V-T1A SMD crystal with a load capacitance of 9 pF.
The internal and external load capacitance is chosen to closely match the required 9 pF.
(3) Current for brownout and WDT clocked by SMCLK included.
(4) Current for brownout and WDT clocked by ACLK included.
30
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: MSP430F2619S-HT