TS3A5223_14 Datasheet, PDF (3/15 Pages) Texas Instruments – 0.45Ω Dual SPDT Bidirectional Analog Switch

www.ti.com
TS3A5223
SCDS339A – JANUARY 2013 – REVISED FEBRUARY 2013
ELECTRICAL CHARACTERISTICS
Specified over the recommended junction temperature range T_A= T_J = –40°C to 85°C Typical values are at T_A= T_J = 25°C
(unless otherwise noted).
PARAMETER
DC CHARACTERISTICS
V_IH
High-level Input voltage SEL1, SEL2 inputs
V_IL
Low-level Input voltage SEL1, SEL2
R_ON
ΔR_ON
Switch ON Resistance
Difference of on-state resistance between
switches
R_ON-FLAT
ON resistance flatness
I_OFF
NC, NO pin leakage current when not selected
I_S(ON)
NC, NO pin leakage current when selected
I_SEL
Select Pin input leakage current
I_CC
Quiescent supply current
I_CCLV
Supply current change
SWITCHING PARAMETERS⁽¹⁾⁽²⁾
t_PHL
Logic high to low propagation delay
t_PLH
Logic low to high propagation delay
t_ON
Turn-ON time
t_OFF
Turn-OFF time
t_D
Break-before-make time delay
Q_INJ
Charge Injection
AC CHARACTERISTICS
BW
-3dB Bandwidth
V_ISO
V_Xtalk
Channel OFF isolation
Channel-to-Channel Cross talk
THD
Total harmonic distortion
C_SEL
C_ON
C_OFF
Select Pin Input Capacitance
NC, NO, and COM input capacitance when switch
is selected
NC, NO, and COM input capacitance when switch
is not selected
VCC (V)
TEST CONDITIONS
3.6
2.3
1.8
3.6
2.3
1.8
3.6
2.3
V_S = 0 to VCC, IS = 100 mA,
VSEL = 1.0V, 0V
1.8
3.6
V_S = 2V, 0.8V, IS = 100 mA, VSE L=
1.0V, 0V
3.6
2.3
V_S = 0 to VCC, IS = 100mA, VSEL =
1.0V, 0V
1.8
3.6
V_S = 0.3 or 3.0V, VCOM = 3.0 or 0.3V
3.6
V_S = 0.3 or 3.0V, VCOM = No Load
V_S
Vs = 0 or 3.6 V
3.6
VSEL = 0 or VCC
3.6
VSEL = 1.0V to VSEL=VCC
3.6
2.5
1.8
3.6
2.5
1.8
2.3-3.6
2.3-3.6
3.6
3.6
R_L = 50 Ω, C_L = 35 pF
R_L = 50 Ω, C_L = 35 pF
R_L = 50 Ω, C_L = 35 pF, VS = 1.5 V
R_L = 50 Ω, C_L = 35 pF, VS = 1.5 V
R_L = 50 Ω, C_L = 35 pF, VS = 1.5 V
C_L = 1 nF, VS = 0 V
1.65V-3.6V R_L = 50 Ω, C_L = 35 pF
1.65V-3.6V VS = 1 V rms, f = 100 kHz
1.65V-3.6V VS=1V rms, f= 100kHz
1.65V-3.6V
R_L = 600 Ω, VSEL = 2 Vpk-pk,
f = 20 Hz to 20 kHz
3.3V
f =1 MHz
3.3V
f = 1 MHz
3.3V
f = 1 MHz
MIN TYP MAX UNIT
0.8
0.8
0.8
0.45
0.6
0.85
V
0.3
0.3 V
0.3
0.6
0.8 Ω
1.2
0.05
0.1
0.2
0.15 0.35
0.4 0.65
5
90 nA
4
60 nA
100 nA
700 2000 nA
200 nA
0.1
0.2
0.2
0.1
0.2
0.2
2
8
40
ns
ns
70 ns
75 ns
ns
pC
80
–70
–75
0.01%
3
115
50
MHz
dB
dB
pF
pF
pF
(1) Rise and Fall propagation delays, t_PHL and t_PLH, are measured between 50% values of the input and the corresponding output signal
amplitude transition.
(2) Assured by characterization only. Validated during qualification. Not measured in production testing.
Copyright © 2013, Texas Instruments Incorporated
Product Folder Links :TS3A5223
Submit Documentation Feedback
3