SN74LVC373A-EP Datasheet, PDF (3/14 Pages) Texas Instruments – OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS

www.ti.com
Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
SN74LVC373A-EP
OCTAL TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCAS737C – NOVEMBER 2003 – REVISED MARCH 2007
V_CC Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Voltage range applied to any output in the high-impedance or power-off state⁽²⁾
V_O
Voltage range applied to any output in the high or low state⁽²⁾⁽³⁾
I_IK
Input clamp current
V_I < 0
I_OK Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through V_CC or GND
DB package
θ_JA
Package thermal impedance⁽⁴⁾
DW package
PW package
T_stg Storage temperature range⁽⁵⁾
MIN
MAX UNIT
–0.5
6.5 V
–0.5
6.5 V
–0.5
6.5 V
–0.5 V_CC + 0.5 V
–50 mA
–50 mA
±50 mA
±100 mA
120
58 °C/W
83
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of V_CC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
(5) Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.
Recommended Operating Conditions⁽¹⁾
V_CC Supply voltage
V_IH High-level input voltage
V_IL
Low-level input voltage
V_I
Input voltage
V_O
Output voltage
I_OH High-level output current
I_OL
Low-level output current
∆t/∆v Input transition rise or fall rate
T_A
Operating free-air temperature
Operating
Data retention only
V_CC = 2.7 V to 3.6 V
V_CC = 2.7 V to 3.6 V
High or low state
3-state
V_CC = 2.7 V
V_CC = 3 V
V_CC = 2.7 V
V_CC = 3 V
Q suffix
M suffix
MIN MAX UNIT
2
3.6
V
1.5
2
V
0.8 V
0
5.5 V
0
V_CC
V
0
5.5
–12
mA
–24
12
mA
24
10 ns/V
–40
125
°C
–55
125
(1) All unused inputs of the device must be held at V_CC or GND to ensure proper device operation. See the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
3