English
Language : 

SN74LVC16373_14 Datasheet, PDF (3/12 Pages) Texas Instruments – 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS
◁
www.ti.com
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
SN74LVC16373
16-BIT TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCAS315B – NOVEMBER 1993 – REVISED MARCH 2005
VCC Supply voltage range
VI
Input voltage range(2)
VO
Output voltage range(2)(3)
IIK
Input clamp current
IOK
Output clamp current
IO
Continuous output current
Continuous current through VCC or GND
Maximum power dissipation at TA = 55°C (in still air)(4)
Tstg Storage temperature range
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
DGG package
DL package
MIN
MAX UNIT
–0.5
4.6
V
–0.5
4.6
V
–0.5 VCC + 0.5
V
–50 mA
±50 mA
±50 mA
±100 mA
0.85
W
1.2
–65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils. For
more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology Data
Book, literature number SCBD002B.
Recommended Operating Conditions(1)
VCC
Supply voltage
VIH
High-level input voltage
VIL
Low-level input voltage
VI
Input voltage
VO
Output voltage
IOH
High-level output current
IOL
∆t/∆V
TA
Low-level output current
Input transition rise or fall rate
Operating free-air temperature
VCC = 2.7 V to 3.6 V
VCC = 2.7 V to 3.6 V
VCC = 2.7 V
VCC = 3 V
VCC = 2.7 V
VCC = 3 V
MIN MAX UNIT
2.7 3.6 V
2
V
0.8 V
0 VCC
V
0 VCC
V
–12
mA
–24
12
mA
24
0
10 ns/V
–40
85 °C
(1) Unused control inputs must be held high or low to prevent them from floating.
3
 ▷