SN74ALVCH162836_09 Datasheet, PDF (3/16 Pages) Texas Instruments – 20-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS

www.ti.com
1
OE
56
CLK
29
LE
55
A1
SN74ALVCH162836
20-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES122F – JULY 1997 – REVISED OCTOBER 2004
LOGIC DIAGRAM (POSITIVE LOGIC)
1D
C1
CLK
2
Y1
To 19 Other Channels
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_CC Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Output-voltage range⁽²⁾⁽³⁾
I_IK
Input clamp current
V_I < 0
I_OK Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through each V_CC or GND
DGG package
θ_JA
Package thermal impedance⁽⁴⁾
DGV package
DL package
T_stg Storage temperature range
MIN
MAX UNIT
-0.5
4.6
V
-0.5
4.6
V
-0.5 V_CC + 0.5
V
-50 mA
-50 mA
±50 mA
±100 mA
81
86 °C/W
74
-65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51.
3