|
LMH6738 Datasheet, PDF (3/20 Pages) National Semiconductor (TI) – Very Wideband, Low Distortion Triple Op Amp | |||
|
◁ |
LMH6738
www.ti.com
SNOSAC1E â APRIL 2004 â REVISED MARCH 2013
Electrical Characteristics (1)
AV = +2, VCC = ±5V, RL = 100â¦, RF = 549â¦; unless otherwise specified.
Symbol
Parameter
Conditions
Min
Frequency Domain Performance
UGBW
SSBW
LSBW
GFPL
-3 dB Bandwidth
-3 dB Bandwidth
0.1 dB Bandwidth
Peaking
Unity Gain, VOUT = 200 mVPP
VOUT = 200 mVPP
VOUT = 2 VPP
VOUT = 2 VPP
DC to 75 MHz
GFR1
Rolloff
GFR2
Rolloff
Time Domain Response
DC to 150 MHz, VOUT = 2 VPP
@ 300 MHz, VOUT = 2 VPP
TRS
TRL
Rise and Fall Time
(10% to 90%)
2V Step
5V Step
SR
Slew Rate
5V Step
ts
te
td
Distortion
HD2L
Settling Time to 0.1%
Enable Time
Disable Time
2nd Harmonic Distortion
HD2
HD2H
HD3L
3rd Harmonic Distortion
HD3
HD3H
Equivalent Input Noise
2V Step
From Disable = rising edge.
From Disable = falling edge.
2 VPP, 5 MHz
2 VPP, 20 MHz
2 VPP, 50 MHz
2 VPP, 5 MHz
2 VPP, 20 MHz
2 VPP, 50 MHz
VN
Non-Inverting Voltage
ICN
Inverting Current
NCN
Non-Inverting Current
Video Performance
>1 MHz
>1 MHz
>1 MHz
DG
Differential Gain
DP
Differential Phase
Static, DC Performance
VIO
Input Offset Voltage (2)
4.43 MHz, RL = 150â¦
4.43 MHz, RL = 150â¦
IBN
Input Bias Current (2)
Non-Inverting
â15
â20
IBI
Input Bias Current (2)
Inverting
PSRR
Power Supply Rejection Ratio (2)
50
48.5
CMRR
Common Mode Rejection Ratio (2)
46
44
XTLK
ICC
Crosstalk
Supply Current (2)
Input Referred, f=10MHz, Drive
channels A,C measure channel B
All three amps Enabled, No Load
Supply Current Disabled V+
RL = â
Typ
750
480
400
150
0
0.1
1.0
0.9
1.7
3300
10
7.3
4.5
â80
â71
â55
â90
â85
â65
2.3
12
3
.02
.01
0.5
â7
â2
53
50
â80
32
1.9
Max
Units
MHz
MHz
MHz
dB
dB
dB
ns
V/µs
ns
ns
ns
dBc
dBc
nV/âHz
pA/âHz
pA/âHz
%
°
±2.5
mV
±4.5
0
µA
+5
±25
μA
±35
dB
dB
dB
35
mA
40
2.2
mA
(1) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very
limited self-heating of the device such that TJ = TA. Performance is indicated in the electrical tables under conditions of internal self
heating where TJ> TA. See Applications Section for information on temperature de-rating of this device." Min/Max ratings are based on
product characterization and simulation. Individual parameters are tested as noted.
(2) Parameter 100% production tested at 25°C.
Copyright © 2004â2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LMH6738
|
▷ |