English
Language : 

HD3SS0001 Datasheet, PDF (3/8 Pages) Texas Instruments – 10.3Gbps Thunderbolt™ and DisplayPort™ Switch
www.ti.com
TRUTH TABLE
HD3SS0001
SLAS827 – FEBRUARY 2012
Device Mode States
Thunderbolt 10G Mode
DisplayPort Mode
TMDS Mode
Detect Mode
Sleep Power Mode/ Invalid
State Modes
S0
(System Power State)
1 (System Active)
0 (System Sleep)
1 (System Active)
0 (System Sleep)
1 (System Active)
0 (System Sleep)
1 (System Active)
0 (System Sleep)
X - Don't Care
Control Lines
DP_EN
10G_EN
1
1
1
1
0
0
0
0
0
0
0
0
1
0
1
0
0
1
TBC-4
(CA_Detect)
X - Don't Care
X - Don't Care
0
0
1
1
X - Don't Care
X - Don't Care
X - Don't Care
Device & PU/PD Configurations
MUX Outputs
2:1 Mux
(DP ML)
3:1 Mux
(TB 10Gbps)
TBC-16/TBC-18 (AUX)
Integrated PU/PD State
LSTx & LSRx
TB Rx_1
Off
LSTx & LSRx
3-stated
Off
DP ML1
AUX
On
3-stated
3-stated
On
DP ML1
DDC
Off
3-stated
3-stated
Off
LSTx & LSRx
3-stated
On
LSTx & LSRx
3-stated
On
3-stated
3-stated
Off
MUX PIN CONNECTION TABLE(1)
CONNECTOR SIDE PIN
TBC-16
TBC-18
TBC-9
TBC-11
TBC-4
TBC-2
CONTROLLER SIDE PIN
DDC_SCL or AUX(p) or TB Rx_1(p)
DDC_SDA or AUX(n) or TB Rx_1(n)
ML1(p) or LSTx
ML1(n) or LSRx
CA_DET
HPD
(1) The HD3SS0001 can tolerate polarity inversions for the differential signals denoted by the (p) and (n) terminology to ease potential
board routing issues.The LSTx/LSRx cannot be swapped since they are buffered and therefore uni-directional. Also, note the integrated
pullup on TBC-18 and the integrated pulldown on TBC-16 cannot be swapped.
PIN
NUMBER
NAME
27
AUX(p)
28
AUX(n)
5
TB Rx_1(p)
6
TB Rx_1(n)
8
ML1(p)
9
ML1(n)
20
TBC-16
19
TBC-18
17
TBC-9
16
TBC-11
25
DDC_SCL
26
DDC_SDA
2
CA_DET
23
TBC-4
3
HPD
22
TBC-2
PIN FUNCTIONS
I/O
DESCRIPTION
I/O
Controller Side AUX Positive Signal
Controller Side AUX Negative Signal
O
Controller Side 10Gbps Positive Signal
Controller Side 10Gbps Negative Signal
I
Controller Side Channel 1, DisplayPort Main Link 1 Positive Signal
Controller Side Channel 1, DisplayPort Main Link 1 Negative Signal
I/O
Connector Side 10G or AUX Positive Signal or DDC CLK with integrated pulldown
Connector Side 10G or AUX Negative Signal or DDC Data with integrated pullup
I/O
Connector Side DP Main Link 1 Positive Signal or UART TX
Connector Side DP Main Link 1 Negative Signal or UART RX
I/O Controller Side DDC ClockController Side DDC Data
O
Controller Side Cable Detect
I
Connector Side Cable Detect with integrated pulldown
O
Controller Side Hot Plug Detect
I
Connector Side Hot Plug Detect
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s) :HD3SS0001
Submit Documentation Feedback
3