DS96F172MQML_13 Datasheet, PDF (3/14 Pages) Texas Instruments – EIA-485/EIA-422 Quad Differential Drivers

DS96F172MQML, DS96F174MQML
www.ti.com
Function Tables (Each Driver)
SNOSAS8A – APRIL 2011 – REVISED APRIL 2013
Input
A
H
L
H
L
X
(1) H = High Level
L = Low Level
X = Don't Care
Z = High Impedance (Off)
Input
A
H
L
X
(1) H = High Level
L = Low Level
X = Don't Care
Z = High Impedance (Off)
Table 1. DS96F172⁽¹⁾
Enable
E
E
H
X
H
X
X
L
X
L
L
H
Outputs
Y
Z
H
L
L
H
H
L
L
H
Z
Z
Table 2. DS96F174⁽¹⁾
Enable
E
H
H
L
Outputs
Y
Z
H
L
L
H
Z
Z
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾
Storage Temperature Range (T_Stg)
Lead Temperature (Soldering, 60 sec.)
Maximum Package Power Dissipation at 25°C⁽²⁾
LCCC package
CDIP package
Ceramic Flatpack package
Supply Voltage
Enable Input Voltage
−65°C ≤ T_A ≤ +175°C
300°C
2,000 mW
1,800 mW
1,000 mW
7.0V
5.5V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not verify specific performance limits. For verified specifications and test conditions, see the
Electrical Characteristics. The verified specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
(2) Above T_A = 25°C, derate LCCC package 13.3, CDIP package 12.5, Ceramic flatpack package 7.1 mW/°C
Recommended Operating Conditions
Supply Voltage (V_CC)
Common Mode Output Voltage (V_OC)
Output Current High (I_OH)
Output Current Low (I_OL)
Operating Temperature (T_A)
Min
Max
Units
4.50
5.50
V
−7.0
+12.0
V
−60
mA
60
mA
−55
+125
°C
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS96F172MQML DS96F174MQML