English
Language : 

DS90UB903Q_15 Datasheet, PDF (3/47 Pages) Texas Instruments – 10 - 43MHz 18 Bit Color FPD-Link III Serializer and Deserializer with Bidirectional Control Channel
www.ti.com
DS90UB903Q Pin Diagram
DS90UB903Q, DS90UB904Q
SNLS332E – JUNE 2010 – REVISED APRIL 2013
VDDIO 31
DIN[8] 32
DIN[9] 33
VDDD 34
DIN[10] 35
DIN[11] 36
DIN[12] 37
DIN[13] 38
DIN[14] 39
DIN[15] 40
DAP = GND
DS9UB903Q
Serializer
40-Pin WQFN
(Top View)
20 GPO[1]
19 GPO[0]
18 VDDCML
17 DOUT+
16 DOUT-
15 VDDT
14 VDDPLL
13 PDB
12 MODE
11 RES
Serializer - DS90UB903Q
40 Pin WQFN (Top View)
See Package Number RTA0040A
DS90UB903Q SERIALIZER PIN DESCRIPTIONS
Pin Name
Pin No.
I/O, Type
Description
LVCMOS PARALLEL INTERFACE
DIN[20:0]
5, 4, 3, 2, 1,
40, 39, 38, 37,
36, 35, 33, 32,
30, 29, 28, 27,
26, 25, 24, 23
Inputs,
LVCMOS
w/ pull down
Parallel data inputs.
PCLK
6
Input, LVCMOS Pixel Clock Input Pin. Strobe edge set by TRFB control register.
w/ pull down
GENERAL PURPOSE OUTPUT (GPO)
GPO[3:0]
22, 21, 20, 19
Output,
LVCMOS
General-purpose output pins can be used to control and respond to various
commands.
BIDIRECTIONAL CONTROL BUS - I2C COMPATIBLE
SCL
SDA
MODE
7
Input/Output, Clock line for the bidirectional control bus communication
Open Drain SCL requires an external pull-up resistor to VDDIO.
8
Input/Output, Data line for the bidirectional control bus communication
Open Drain SDA requires an external pull-up resistor to VDDIO.
I2C Mode select
MODE = L, Master mode (default); Device generates and drives the SCL clock line.
12
Input, LVCMOS
w/ pull down
Device is connected to slave peripheral on the bus. (Serializer initially starts up in
Standby mode and is enabled through remote wakeup by Deserializer)
MODE = H, Slave mode; Device accepts SCL clock input and attached to an I2C
controller master on the bus. Slave mode does not generate the SCL clock, but uses
the clock generated by the Master for the data transfers.
ID[x]
9
Input, analog
Device ID Address Select
Resistor to Ground and 10 kΩ pull-up to 1.8V rail. See Table 3
CONTROL AND CONFIGURATION
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90UB903Q DS90UB904Q