DS90LV048A_16 Datasheet, PDF (3/22 Pages) Texas Instruments – 3-V LVDS Quad CMOS Differential Line Receiver

www.ti.com
5 Pin Configuration and Functions
D or PW Package
16-Pin SOIC or TSSOP
Top View
DS90LV048A
SNLS045C – JULY 1999 – REVISED JULY 2016
NAME
EN
PIN
NO.
16
EN*
GND
R_IN+
R_IN−
R_OUT
V_CC
9
12
2, 3, 6, 7
1, 4, 5, 8
10, 11, 14,
15
13
Pin Functions
I/O
DESCRIPTION
Receiver enable pin: When EN is low, the receiver is disabled. When EN is high and EN* is low
I
or open, the receiver is enabled. If both EN and EN* are open circuit, then the receiver is
disabled.
Receiver enable pin: When EN* is high, the receiver is disabled. When EN* is low or open and
I
EN is high, the receiver is enabled. If both EN and EN* are open circuit, then the receiver is
disabled.
—
Ground pin
I
Noninverting receiver input pin
I
Inverting receiver input pin
O
Receiver output pin
—
Power supply pin, +3.3V ± 0.3V
6 Specifications
6.1 Absolute Maximum Ratings
See ⁽¹⁾⁽²⁾
MIN
MAX
UNIT
Supply voltage (V_CC)
Input voltage (R_IN+, R_IN−)
Enable input voltage (EN, EN*)
Output voltage (R_OUT)
Maximum package power dissipation
at +25°C
D0016A package
PW0016A package
Derate D0016A
package
Derate PW0016A
package
above +25°C
above +25°C
–0.3
4
V
–0.3
3.6
V
–0.3
–0.3
V_CC + 0.3
V
V_CC + 0.3
V
1025
mW
866
8.2
mW/°C
6.9
Lead temperature soldering
(4 s)
260
°C
Maximum junction temperature
150
°C
Storage temperature, T_stg
–65
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
Copyright © 1999–2016, Texas Instruments Incorporated
Product Folder Links: DS90LV048A
Submit Documentation Feedback
3