DS90C365A_13 Datasheet, PDF (3/17 Pages) Texas Instruments – +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display Link-87.5 MHz

DS90C365A
www.ti.com
SNLS181I – APRIL 2004 – REVISED APRIL 2013
Electrical Characteristics⁽¹⁾ (continued)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ ⁽²⁾
Max
Unit
TRANSMITTER SUPPLY CURRENT
ICCTW
Transmitter Supply Current,
Worst Case
ICCTG
Transmitter Supply Current,
16 Grayscale
ICCTZ
Transmitter Supply Current,
Power Down
R_L = 100Ω,
C_L = 5 pF,
Worst Case Pattern
f = 25MHz
f = 40 MHz
(Figure 1, Figure 3 )
f = 65 MHz
"Typ" values are given _{f = 87.5 MHz}
for V_CC = 3.6V and T_A
= +25°C, " Max " values
are given for V_CC =
3.6V and T_A = −10°C
R_L = 100Ω,
C_L = 5 pF,
16 Grayscale Pattern
f = 25 MHz
f = 40 MHz
(Figure 2, Figure 3 )
f = 65 MHz
"Typ" values are given _{f = 87.5 MHz}
for V_CC = 3.6V and T_A
= +25°C, " Max " values
are given for V_CC =
3.6V and T_A = −10°C
Power Down = Low,
Driver Outputs in TRI-STATE^® under
Power Down Mode
29
40
mA
34
45
mA
42
55
mA
48
60
mA
28
40
mA
32
45
mA
39
50
mA
44
56
mA
11
150
μA
Recommended Transmitter Input Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol
Parameter
TCIT
TxCLK IN Transition Time (Figure 5)
TCIP
TxCLK IN Period (Figure 6)
TCIH
TxCLK IN High Time (Figure 6)
TCIL
TxCLK IN Low Time (Figure 6)
TXIT
TxIN , and /PD pin Transition Time
TXPD Minimum pulse width for PWR DOWN pin signal
Min Typ Max Unit
1.0
6.0
ns
11.76 T
50
ns
0.35T 0.5T 0.65T
ns
0.35T 0.5T 0.65T
ns
1.5
6.0
ns
1
us
Transmitter Switching Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified
Symbol
Parameter
Min
Typ
Max
Unit
LLHT
LVDS Low-to-High Transition Time (Figure 4)
0.75
1.4
ns
LHLT
TPPos0
LVDS High-to-Low Transition Time (Figure 4)
Transmitter Output Pulse Position (Figure 12)⁽¹⁾ f = 25MHz
0.75
1.4
ns
−0.45
0
+0.45
ns
TPPos1
Transmitter Output Pulse Position
5.26
5.71
6.16
ns
TPPos2
Transmitter Output Pulse Position
10.98
11.43
11.88
ns
TPPos3
Transmitter Output Pulse Position
16.69
17.14
17.59
ns
TPPos4
Transmitter Output Pulse Position
22.41
22.86
23.31
ns
TPPos5
Transmitter Output Pulse Position
28.12
28.57
29.02
ns
TPPos6
Transmitter Output Pulse Position
33.84
34.29
34.74
ns
(1) The Minimum and Maximum Limits are based on statistical analysis of the device performance over process, voltage, and temperature
ranges. This parameter is functionality tested only on Automatic Test Equipment (ATE).
Copyright © 2004–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90C365A