DS10CP152 Datasheet, PDF (3/15 Pages) National Semiconductor (TI) – 1.5 Gbps 2X2 LVDS Crosspoint Switch

DS10CP152
www.ti.com
SNLS261D – OCTOBER 2007 – REVISED MAY 2011
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage
LVCMOS Input Voltage
LVDS Input Voltage
Differential Input Voltage |VID|
LVDS Output Voltage
LVDS Differential Output Voltage
LVDS Output Short Circuit Current Duration
Junction Temperature
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Package Power Dissipation at 25°C
D Package
Derate D Package
Package Thermal Resistance
θ_JA
θ_JC
ESD Susceptibility
HBM ⁽³⁾
MM ⁽⁴⁾
CDM ⁽⁵⁾
−0.3V to +4V
−0.3V to (V_CC + 0.3V)
−0.3V to +4V
1V
−0.3V to (V_CC + 0.3V)
0V to 1V
5 ms
+150°C
−65°C to +150°C
+260°C
1.72W
13.75 mW/°C above +25°C
+72.7°C/W
+41.2°C/W
≥7 kV
≥250V
≥1250V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Supply Voltage (V_CC)
Receiver Differential Input Voltage (V_ID)
Operating Free Air Temperature (T_A)
Min
Typ
Max
Units
3.0
3.3
3.6
V
0
1
V
−40
+25
+85
°C
DC Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified. ^(1)(2)(3)
Symbol
Parameter
Conditions
Min Typ Max Units
LVCMOS DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IH
High Level Input Current
V_IN = 3.6V
V_CC = 3.6V
2.0
GND
V_DD
V
0.8
V
40
175 250
μA
(1) The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not guaranteed.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V_OD and ΔV_OD.
(3) Typical values represent most likely parametric norms for V_CC = +3.3V and T_A = +25°C, and at the Recommended Operation Conditions
at the time of product characterization and are not guaranteed.
Copyright © 2007–2011, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS10CP152