DRV102_15 Datasheet, PDF (3/27 Pages) Texas Instruments – PWM SOLENOID/VALVE DRIVER

CONNECTION DIAGRAMS
Top Front View
TO-220, DDPAK
7-Lead
Stagger-Formed
TO-220
7-Lead
DDPAK
Surface-Mount
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, V_S .............................................................................. 60V
Input Voltage .......................................................................... –0.2V to V_S
PWM Adjust Input ................................................ –0.2V to V_S (24V max)
Delay Adjust Input ................................................ –0.2V to V_S (24V max)
Operating Temperature Range ...................................... –55°C to +125°C
Storage Temperature Range ......................................... –55°C to +125°C
Junction Temperature .................................................................... +150°C
Lead Temperature (soldering, 10s)⁽²⁾ ........................................... +300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. (2) Vapor-phase or IR reflow techniques are recom-
mended for soldering the DRV102F surface-mount package. Wave soldering
is not recommended due to excessive thermal shock and “shadowing” of
nearby devices.
1234567
1234567
In _PWM V_{S Flag}
Delay Gnd Out
In PWM V_{S Flag}
Delay Gnd Out
NOTE: Tabs are electrically connected to ground (pin 4).
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instruments
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes
could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
For the most current package and ordering information, see the Package Ordering Addendum at the end of this data sheet.
DRV102
3
SBVS009B
www.ti.com