DRV102_15 Datasheet, PDF (25/27 Pages) Texas Instruments – PWM SOLENOID/VALVE DRIVER

KTW (R-PSFM-G7)
MECHANICAL DATA
MPSF015 – AUGUST 2001
PLASTIC FLANGE-MOUNT
0.0625 (1,587) ^H
0.0585 (1,485)
0.410 (10,41)
0.385 (9,78)
0.303 (7,70)
0.297 (7,54)
–A–
0.055 (1,40)
0.045 (1,14)
0.006
–B–
0.064 (1,63)
0.056 (1,42)
0.304 (7,72)
0.296 (7,52)
0.300 (7,62)
0.252 (6,40)
0.370 (9,40)
0.330 (8,38)
H
0.605 (15,37)
0.595 (15,11)
C
A
0.012 (0,305)
0.000 (0,00)
0.019 (0,48)
0.017 (0,43)
0.050 (1,27)
0.034 (0,86)
C F _{0.022 (0,57)}
0.026 (0,66)
C
0.014 (0,36)
0.010 (0,25) M B A M _{C M}
0.187 (4,75)
0.179 (4,55)
0.104 (2,64)
0.096 (2,44) H
0°~3°
0.183 (4,65)
0.170 (4,32)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead width and height dimensions apply to the
plated lead.
D. Leads are not allowed above the Datum B.
E. Stand–off height is measured from lead tip
with reference to Datum B.
F. Lead width dimension does not include dambar
protrusion. Allowable dambar protrusion shall not
cause the lead width to exceed the maximum
dimension by more than 0.003”.
G. Cross–hatch indicates exposed metal surface.
H. Falls within JEDEC MO–169 with the exception
of the dimensions indicated.
4201284/A 08/01
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265