 English |
|
|
|
|
|
|
|
| ADC0832CCN Datasheet, PDF (3/40 Pages) Texas Instruments – ADC0831-N/ADC0832-N/ADC0834-N/ADC0838-N 8-Bit Serial I/O A/D Converters with Multiplexer Options | |||
| |||
| ◁ |
ADC0831-N, ADC0832-N, ADC0834-N, ADC0838-N
www.ti.com
SNAS531B â AUGUST 1999 â REVISED MARCH 2013
Absolute Maximum Ratings(1)(2)(3)
Current into V+(4)
Supply Voltage, VCC(4)
Voltage
Input Current per
Storage Temperature
Package Dissipation
Lead Temperature (Soldering 10 sec.)
PLCC Package
ESD Susceptibility(6)
Logic Inputs
Analog Inputs
Pin (5)
Package
at TA = 25°C (Board Mount)
PDIP Package
Vapor Phase (60 sec.)
Infrared (15 sec.)
15 mA
6.5V
â0.3V to VCC + 0.3V
â0.3V to VCC + 0.3V
±5 mA
±20 mA
â65°C to +150°C
0.8W
260°C
215°C
220°C
2000V
(1) All voltages are measured with respect to the ground plugs.
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its specified operating conditions.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(4) Internal zener diodes (6.3 to 8.5V) are connected from V+ to GND and VCC to GND. The zener at V+ can operate as a shunt regulator
and is connected to VCC via a conventional diode. Since the zener voltage equals the A/D's breakdown voltage, the diode insures that
VCC will be below breakdown when the device is powered from V+. Functionality is therefore ensured for V+ operation even though the
resultant voltage at VCC may exceed the specified Absolute Max of 6.5V. It is recommended that a resistor be used to limit the max
current into V+. (See Figure 24 in Functional Description)
(5) When the input voltage (VIN) at any pin exceeds the power supply rails (VIN < Vâ or VIN > V+) the absolute value of current at that pin
should be limited to 5 mA or less. The 20 mA package input current limits the number of pins that can exceed the power supply
boundaries with a 5 mA current limit to four.
(6) Human body model, 100 pF discharged through a 1.5 kΩ resistor.
Operating Ratings(1)(2)
Supply Voltage, VCC
Temperature Range (TMIN ⤠TA ⤠TMAX)
ADC0832/8CIWM ADC0834BCN, ADC0838BCV,
ADC0831/2/4/8CCN, ADC0838CCV
ADC0831/2/4/8CCWM
4.5 VDC to 6.3 VDC
â40°C to +85°C
0°C to +70°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its specified operating conditions.
(2) All voltages are measured with respect to the ground plugs.
Copyright © 1999â2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: ADC0831-N ADC0832-N ADC0834-N ADC0838-N
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese