TMS470MF06607 Datasheet, PDF (25/64 Pages) Texas Instruments – TMS470MF06607 16/32-Bit RISC Flash Microcontroller

TMS470MF06607
www.ti.com
SPNS157C – JANUARY 2012
3.10.1 Standard Buffer Enable Register (GPREG1)
A general purpose register with the system frame has been utilized to control the enabling of standard
buffer mode. This register is shown in Figure 3-2 and described in Table 3-8
31
16
Reserved
R-0
15
12
11
10
9
8
Reserved
GIOA_SBEN
DCAN2_SBEN
DCAN1_SBEN
ADC.ADEVT_
SBEN
R-0
RW-0
RW-0
RW-0
RW-0
7
6
5
4
Reserved
MIBSPIP2_
SBEN
MIBSPI1_
SBEN
LIN2SCI2_
SBEN
RW-0
RW-0
RW-0
RW-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
3
LIN1SCI1_
SBEN
RW-0
2
HET_SBEN
RW-0
1
RST_SBEN
RW-0
0
ECLK_SBEN
RW-0
Figure 3-2. General-Purpose Register 1 (GPREG1)
Table 3-8. General-Purpose Register 1 (GPREG1) Field Descriptions
Bit
31-12
11
Field
Reserved
GIOA_SBEN
10 DCAN2_SBEN
9 DCAN1_SBEN
8 ADC.ADEVT_SBEN
7 Reserved
6 MIBSPIP2_SBEN
5 MIBSPI1
4 LIN2SCI2_SBEN
Value
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Description
These bits are reserved. Reads return 0 and writes have no effect.
GIOA port standard buffer enable bit.
This bit enables/disables standard buffer mode for all GIOA pins
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
DCAN2 standard buffer enable bit.
This bit enables/disables standard buffer mode for all DCAN2 pins.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
DCAN1 standard buffer enable bit.
This bit enables/disables standard buffer mode for all DCAN1 pins.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
ADC.ADEVT standard buffer enable bit.
This bit enables/disables standard buffer mode for the ADC.ADEVT pin.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for the ADEVT pin.
Reserved
Reserved
Reserved
MIBSPIP2 standard buffer enable bit.
This bit enables/disables standard buffer mode for all MIBSPIP2 pins.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
MIBSPI1 standard buffer enable bit.
This bit enables/disables standard buffer mode for all MIBSPI1 pins.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
LINSCI2 standard buffer enable bit.
This bit enables/disables standard buffer mode for all LINSCI2 pins.
Standard buffer mode is not enabled.
Standard buffer mode is enabled for all associated module pins.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS470MF06607
Device Configuration
25