TMS28F002AEB Datasheet, PDF (24/79 Pages) Texas Instruments – AUTO-SELECT BOOT-BLOCK FLASH MEMORIES

TMS28F002Axy, TMS28F200Axy
262144 BY 8-BIT/131072 BY 16-BIT
AUTO-SELECT BOOT-BLOCK FLASH MEMORIES
SMJS826D – JANUARY 1996 – REVISED SEPTEMBER 1997
electrical characteristics for TMS28F002ASy and TMS28F200ASy over recommended ranges of
supply voltage and operating free-air temperature, using test conditions given in Table 9 (unless
otherwise noted) (continued)
PARAMETER
TEST CONDITIONS
IPP4
VPP supply current (block-erase)
(see Notes 11 and 12)
Block-erase in progress
IPP5
VPP supply current (erase-suspend)
(see Notes 11 and 12)
Block-erase suspended
ICCS
ICCL
VCC supply current
(standby)
TTL-input level
VCC = VCC MAX,
E = RP = VIH
" CMOS-input level VCC = VCC MAX,
E = RP = VCC 0.2
VCC supply current (reset / deep power-down
mode)
RP = VSS ± 0.2 V
5-V VPP range,
3.3-V VCC range
5-V VPP range,
5-V VCC range
12-V VPP range,
3.3-V VCC range
12-V VPP range,
5-V VCC range
5-V VPP range,
3.3-V VCC range
5-V VPP range,
5-V VCC range
12-V VPP range,
3.3-V VCC range
12-V VPP range,
5-V VCC range
3.3-V VCC range
5-V VCC range
3.3-V VCC range
5-V VCC range
0°C to 70°C
– 40°C to 85°C
ICC1
VCC supply current
(active read)
TTL-input level
CMOS-input level
E = VSS, G = VIH, IOUT = 0 mA,
f = 5 MHz, 3.3-V VCC range
E = VSS, G = VIH, IOUT = 0 mA,
f = 10 MHz, 5-V VCC range
E = VSS, G = VCC, IOUT = 0 mA,
f = 5 MHz, 3.3-V VCC range
E = VSS, G = VCC, IOUT = 0 mA,
f = 10 MHz, 5-V VCC range
ICC2
VCC supply current (active byte-write)
(see Notes 11 and 12)
VCC = VCC MAX,
Programming in progress
NOTES: 11. Characterization data available
12. All ac current values are RMS unless otherwise noted.
5-V VPP range,
3.3-V VCC range
5-V VPP range,
5-V VCC range
12-V VPP range,
3.3-V VCC range
12-V VPP range,
5-V VCC range
MIN MAX UNIT
30
20
mA
25
15
200
200
µA
200
200
1.5 mA
2 mA
110 µA
130 µA
8
µA
8
30
mA
65
30
mA
60
30
50
mA
25
45
24
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443