OPA376-Q1_16 Datasheet, PDF (24/34 Pages) Texas Instruments – Low-Noise, Low Quiescent Current, Precision Operational Amplifier

OPA376-Q1, OPA2376-Q1, OPA4376-Q1
SBOS549A – APRIL 2011 – REVISED JANUARY 2016
11 Device and Documentation Support
www.ti.com
11.1 Device Support
11.1.1 Development Support
11.1.1.1 TINA-TI™ (Free Software Download)
TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI is a
free, fully-functional version of the TINA software, preloaded with a library of macro models in addition to a range
of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency domain
analysis of SPICE, as well as additional design capabilities.
Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing
capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select
input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.
NOTE
These files require that either the TINA software (from DesignSoft™) or TINA-TI software
be installed. Download the free TINA-TI software from the TINA-TI folder.
11.1.1.2 TI Precision Designs
TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the
theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and
measured performance of many useful circuits. TI Precision Designs are available online at
http://www.ti.com/ww/en/analog/precision-designs/.
11.1.1.3 WEBENCH® Filter Designer
WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH
Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive
components from TI's vendor partners.
Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to
design, optimize, and simulate complete multistage active filter solutions within minutes.
11.2 Documentation Support
11.2.1 Related Documentation
For related documentation see the following:
• Circuit Board Layout Techniques, SLOA089
• INA163: Low-Noise, Low-Distortion Instrumentation Amplifier, SBOS177
• Operational Amplifier Gain stability, Part 3: AC Gain-Error Analysis, SLYT383
• Operational Amplifier Gain Stability, Part 2: DC Gain-Error Analysis, SLYT374
• Op Amp Performance Analysis, SBOS054
• NanoStar™ and NanoFree™ 300 μm Solder Bump WCSP, SBVA017
• Shelf-Life Evaluation of Lead-Free Component Finishes, SZZA046
• Single-Supply Operation of Operational Amplifiers, SBOA059
• Tuning in Amplifiers, SBOA067
• Using Infinite-Gain, MFB Filter Topology in Fully Differential Active Filters, SLYT343
24
Submit Documentation Feedback
Copyright © 2011–2016, Texas Instruments Incorporated
Product Folder Links: OPA376-Q1 OPA2376-Q1 OPA4376-Q1