OPA1662 Datasheet, PDF (20/29 Pages) Texas Instruments – Low-Power, Low Noise and Distortion, Bipolar-Input AUDIO OPERATIONAL AMPLIFIERS

PACKAGE OPTION ADDENDUM
www.ti.com
16-Aug-2012
PACKAGING INFORMATION
Orderable Device
OPA1662AID
OPA1662AIDGK
OPA1662AIDGKR
OPA1662AIDR
OPA1664AID
OPA1664AIDR
OPA1664AIPW
OPA1664AIPWR
Status ^{(1) Package Type Package}
Drawing
ACTIVE
SOIC
D
Pins
8
Package Qty
75
ACTIVE
VSSOP
DGK
8
80
ACTIVE
VSSOP
DGK
8
2500
ACTIVE
SOIC
D
8
2500
PREVIEW
SOIC
D
14
PREVIEW
SOIC
D
14
PREVIEW TSSOP
PW
14
PREVIEW TSSOP
PW
14
50
2500
90
2000
Eco Plan ⁽²⁾
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
TBD
TBD
TBD
TBD
Lead/
Ball Finish
MSL Peak Temp ⁽³⁾
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAUAGLevel-1-260C-UNLIM
CU NIPDAUAGLevel-1-260C-UNLIM
CU NIPDAU Level-2-260C-1 YEAR
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Samples
(Requires Login)
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1