LP2953QML Datasheet, PDF (20/24 Pages) Texas Instruments – Adjustable Micropower Low-Dropout Voltage Regulators

5V Regulator with Error Flags for
LOW BATTERY and OUT OF REGULATION
with SNAP-ON/SNAP-OFF Output
* Connect to Logic or μP control inputs.
20161123
OUTPUT has SNAP-ON/SNAP-OFF feature.
LOW BATT flag warns the user that the battery has discharged down to about 5.8V, giving the user time to recharge the battery or shut down hardware with high
power requirements. The output is still in regulation at this time.
OUT OF REGULATION flag goes low if the output goes below about 4.7V, which could occur from a load fault.
OUTPUT has SNAP-ON/SNAP-OFF feature. Regulator snaps ON at about 5.7V input, and OFF at about 5.6V.
5V Regulator with Timed Power-On Reset, Snap-On/Snap-Off Feature and Hysteresis
Timing Diagram
20161124
Td = (0.28) RC = 28 ms for components shown.
20161125
19
www.national.com