U5B7741393 Datasheet, PDF (2/11 Pages) Texas Instruments – LM741 Operational Amplifier

LM741
SNOSC25C – MAY 1998 – REVISED MARCH 2013
Typical Application
www.ti.com
Figure 4. Offset Nulling Circuit
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings^(1)(2)(3)
Supply Voltage
Power Dissipation ⁽⁴⁾
Differential Input Voltage
Input Voltage ⁽⁵⁾
Output Short Circuit Duration
Operating Temperature Range
Storage Temperature Range
Junction Temperature
Soldering Information
P0008E-Package (10 seconds)
NAB0008A- or LMC0008C-Package (10 seconds)
M-Package
Vapor Phase (60 seconds)
Infrared (15 seconds)
ESD Tolerance ⁽⁶⁾
LM741A
±22V
500 mW
±30V
±15V
Continuous
−55°C to +125°C
−65°C to +150°C
150°C
260°C
300°C
215°C
215°C
400V
LM741
±22V
500 mW
±30V
±15V
Continuous
−55°C to +125°C
−65°C to +150°C
150°C
260°C
300°C
215°C
215°C
400V
LM741C
±18V
500 mW
±30V
±15V
Continuous
0°C to +70°C
−65°C to +150°C
100°C
260°C
300°C
215°C
215°C
400V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
(2) For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(4) For operation at elevated temperatures, these devices must be derated based on thermal resistance, and T_j max. (listed under “Absolute
Maximum Ratings”). T_j = T_A + (θ_jA P_D).
(5) For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
(6) Human body model, 1.5 kΩ in series with 100 pF.
Electrical Characteristics⁽¹⁾
Parameter
Test Conditions
Input Offset Voltage
Average Input Offset Voltage
Drift
T_A = 25°C
R_S ≤ 10 kΩ
R_S ≤ 50Ω
T_AMIN ≤ T_A ≤ T_AMAX
R_S ≤ 50Ω
R_S ≤ 10 kΩ
LM741A
Min Typ Max
LM741
LM741C
Units
Min Typ Max Min Typ Max
0.8 3.0
1.0 5.0
2.0 6.0 mV
4.0
mV
6.0
7.5
15
μV/°C
(1) Unless otherwise specified, these specifications apply for V_S = ±15V, −55°C ≤ T_A ≤ +125°C (LM741/LM741A). For the LM741C/LM741E,
these specifications are limited to 0°C ≤ T_A ≤ +70°C.
2
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741