TLC27M4_15 Datasheet, PDF (2/52 Pages) Texas Instruments – PRECISION QUAD OPERATIONAL AMPLIFIERS

TLC27M4, TLC27M4A, TLC27M4B, TLC27M4Y, TLC27M9
SLOS093D – OCTOBER 1987 – REVISED OCTOBER 2012
www.ti.com
Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M4 (10 mV)
to the high-precision TLC27M9 (900 μV). These advantages, in combination with good common-mode rejection
and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for
upgrading existing designs.
In general, many features associated with bipolar technology are available on LinCMOS™ operational amplifiers,
without the power penalties of bipolar technology. General applications such as transducer interfacing, analog
calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M4 and
TLC27M9. The devices also exhibit low voltage single-supply operation, and low power consumption, making
them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage
range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density
system applications.
The device inputs and outputs are designed to withstand −100-mA surge currents without sustaining latch-up.
The TLC27M4 and TLC27M9 incorporate internal ESD-protection circuits that prevent functional failures at
voltages up to 2000 V as tested under MIL-STD-883C, Method 3015; however, care should be exercised in
handling these devices, as exposure to ESD may result in the degradation of the device parametric performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for
operation from –40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of –55°C to 125°C.
T_A
0°C to 70°C
–40°C to 85°C
–55°C to 125°C
V_IOmax
AT 25°C
900 µV
2 mV
5 mV
10 mV
900 µV
2 mV
5 mV
10 mV
900 µV
10 mV
SMALL
OUTLINE
(D) ⁽¹⁾
TLC27M9CD
TLC27M4BCD
TLC27M4ACD
TLC27M4CD
TLC27M9ID
TLC27M4BID
TLC27M4AID
TLC27M4ID
TLC27M9MD
TLC27M4MD
AVAILABLE OPTIONS
PACKAGE
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
TLC27M9MFK TLC27M9MJ
TLC27M4MFK TLC27M4MJ
PLASTIC
DIP
(N)
TLC27M9CN
TLC27M4BCN
TLC27M4ACN
TLC27M4CN
TLC27M9IN
TLC27M4BIN
TLC27M4AIN
TLC27M4IN
TLC27M9MN
TLC27M4MN
TSSOP
(PW) ⁽¹⁾
CHIP
FORM
(Y)
—
—
—
TLC27M4CPW
—
—
—
TLC27M41PW
—
—
—
—
—
TLC27M4Y
—
—
—
—
—
—
(1) The D and PW package is available taped and reeled. Add R suffix to the device type (e.g., TLC279CDR).
2
Submit Documentation Feedback
Copyright © 1987–2012, Texas Instruments Incorporated
Product Folder Links: TLC27M4 TLC27M4A TLC27M4B TLC27M4Y TLC27M9