English
Language : 

OPA211 Datasheet, PDF (2/37 Pages) Texas Instruments – 1.1nV/Noise, Low Power, Precision Operational Amplifier in Tiny DFN-8 Package
OPA211
OPA2211
SBOS377G – OCTOBER 2006 – REVISED MAY 2009...................................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range (unless otherwise noted).
Supply Voltage
Input Voltage
Input Current (Any pin except power-supply pins)
Output Short-Circuit(2)
Operating Temperature
Storage Temperature
Junction Temperature
ESD Ratings
Human Body Model (HBM)
Charged Device Model (CDM)
VS = (V+) – (V–)
(TA)
(TA)
(TJ)
VALUE
40
(V–) – 0.5 to (V+) + 0.5
±10
Continuous
–55 to +150
–65 to +150
200
3000
1000
UNIT
V
V
mA
°C
°C
°C
V
V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) Short-circuit to VS/2 (ground in symmetrical dual supply setups), one amplifier per package.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
Standard Grade
OPA211AI
OPA2211AI
High Grade
OPA211I
PACKAGE-LEAD
SINGLE
DFN-8 (3mm × 3mm)
ü
MSOP-8
ü
SO-8
ü
DFN-8 (3mm × 3mm)
SO-8 PowerPAD
DFN-8 (3mm × 3mm)
ü
MSOP-8
ü
SO-8
ü
SHUTDOWN
ü
ü
ü
ü
DUAL
PACKAGE
DESIGNATOR
DRG
DGK
D
ü
DRG
ü
DDA
DRG
DGK
D
PACKAGE
MARKING
OBDQ
OBCQ
A TI OPA
211
OBHQ
A TI OPA
2211
OBDQ
OBCQ
TI OPA
211
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
2
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): OPA211 OPA2211