LMH6733 Datasheet, PDF (2/25 Pages) Texas Instruments – Single Supply, 1.0 GHz, Triple Operational Amplifier

LMH6733
SNOSAW0D – JANUARY 2007 – REVISED MAY 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
ESD Tolerance ⁽³⁾
Human Body Model
Machine Model
Supply Voltage (V⁺ - V^–)
I_OUT
Common Mode Input Voltage
Maximum Junction Temperature
Storage Temperature Range
Soldering Information
Infrared or Convection (20 sec.)
Wave Soldering (10 sec.)
Storage Temperature Range
2000V
200V
13.2V
(4)
±V_CC
+150°C
−65°C to +150°C
235°C
260°C
−65°C to +150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(4) The maximum output current (I_OUT) is determined by device power dissipation limitations. See the Power Dissipation section of the
Applications Information for more details.
Operating Ratings ⁽¹⁾
Thermal Resistance
Package
16-Pin SSOP
Temperature Range ⁽²⁾
Supply Voltage (V⁺ - V^–)
(θ_JC)
36°C/W
−40°C
3V
(θ_JA)
120°C/W
+85°C
to
12V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is
P_D = (T_J(MAX) – T_A)/ θ_JA. All numbers apply for packages soldered directly onto a PC Board.
5V Electrical Characteristics ⁽¹⁾
A_V = +2, V_CC = 5V, R_L = 100Ω, R_F = 340Ω; unless otherwise specified.
Symbol
Parameter
Conditions
Frequency Domain Performance
UGBW
SSBW
SSBW
LSBW
0.1 dB
BW
−3 dB Bandwidth
−3 dB Bandwidth
0.1 dB Gain Flatness
Unity Gain, V_OUT = 200 mV_PP
V_OUT = 200 mV_PP, R_L = 100Ω
V_OUT = 200 mV_PP, R_L = 150Ω
V_OUT = 2 V_PP
V_OUT = 200 mV_PP
Min
Typ
Max
Units
870
MHz
650
685
MHz
480
320
MHz
(1) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very
limited self-heating of the device such that T_J = T_A. No specification of parametric performance is indicated in the electrical tables under
conditions of internal self-heating where T_J > T_A.
2
Submit Documentation Feedback
Product Folder Links: LMH6733
Copyright © 2007–2013, Texas Instruments Incorporated