LMH6733 Datasheet, PDF (1/25 Pages) Texas Instruments – Single Supply, 1.0 GHz, Triple Operational Amplifier

LMH6733
www.ti.com
SNOSAW0D – JANUARY 2007 – REVISED MAY 2013
LMH6733 Single Supply, 1.0 GHz, Triple Operational Amplifier
Check for Samples: LMH6733
FEATURES
1
•2 Supply Range 3 to 12V Single Supply
• Supply Range ±1.5V to ±6V Split Supply
• 1.0 GHz −3 dB Small Signal Bandwidth
– (A_V = +1, V_S = ±5V)
• 650 MHz −3 dB Small Signal Bandwidth
– (A_V = +2, V_S = 5V)
• Low Supply Current (5.5 mA per op Amp, V_S =
5V)
• 2.1 nV/√Hz Input Noise Voltage
• 3750 V/μs Slew Rate
• 70 mA Linear Output Current
• CMIR and Output Swing to 1V from Each
Supply Rail
APPLICATIONS
• HDTV Component Video Driver
• High Resolution Projectors
• Flash A/D Driver
• D/A Transimpedance Buffer
• Wide Dynamic Range IF Amp
• Radar/Communication Receivers
• DDS Post-Amps
• Wideband Inverting Summer
• Line Driver
DESCRIPTION
The LMH6733 is a triple, wideband, operational
amplifier designed specifically for use where high
speed and low power are required. Input voltage
range and output voltage swing are optimized for
operation on supplies as low as 3V and up to ±6V.
Benefiting from TI’s current feedback architecture, the
LMH6733 offers a gain range of ±1 to ±10 while
providing stable operation without external
compensation, even at unity gain. These amplifiers
provide 650 MHz small signal bandwidth at a gain of
2 V/V , a low 2.1 nV/√Hz input referred noise and
only consume 5.5 mA (per amplifier) from a single 5V
supply.
The LMH6733 is offered in a 16-Pin SSOP package
with flow through pinout for ease of layout and is also
pin compatible with the LMH6738. Each amplifier has
an individual shutdown pin.
Connection Diagram
Top View
-IN A 1
-
+
+IN A 2
DIS B ₃
-IN B 4
-
+
+IN B 5
16 DIS A
15 ^+VS
14 OUT A
13 -VS
12 OUT B
DIS C 6
11 +VS
-IN C ₇
-
+
+IN C 8
10 OUT C
9 -VS
Figure 1. 16-Pin SSOP Package
See Package Number DBQ0016A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated