DS90LT012AQ_15 Datasheet, PDF (2/14 Pages) Texas Instruments – Automotive LVDS Differential Line Receiver

DS90LT012AQ
SNLS297E – MAY 2008 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
Input Voltage (IN+, IN−)
Output Voltage (TTL OUT)
Output Short Circuit Current
Maximum Package Power Dissipation @ +25°C
DBV Package
Derate DBV Package
Package Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC)
θ_JA
θ_JC
Lead Temperature
Soldering (4 sec.)
Storage Temperature Range
Maximum Junction Temperature
ESD Rating
HBM ⁽³⁾
MM ⁽⁴⁾
CDM ⁽⁵⁾
−0.3V to +4V
−0.3V to +3.9V
−0.3V to (V_DD + 0.3V)
−100mA
794mW
7.22 mW/°C above +25°C
138.5°C/W
107.0°C/W
+260°C
–65°C to +150°C
+135°C
>8 kV
>250V
>1250V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Supply Voltage (V_DD)
Operating Free Air
Temperature (T_A)
Min
Typ
Max
+3.0
+3.3
+3.6
−40
25
+125
Units
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. ⁽¹⁾⁽²⁾
Symbol
Parameter
Conditions
Pin
Min Typ
V_TH
Differential Input High Threshold
V_CM dependant on V_DD
V_TL
Differential Input Low Threshold
V_CM
Common-Mode Voltage
V_DD = 3.0V to 3.6V, V_ID = 100mV
I_IN
Input Current
V_IN = +2.8V V_DD = 3.6V or 0V
V_IN = 0V
V_IN = +3.6V V_DD = 0V
I_IND
Differential Input Current
V_IN+ = +0.4V, V_IN− = +0V
V_IN+ = +2.4V, V_IN− = +2.0V
R_T
Integrated Termination Resistor
C_IN
Input Capacitance
IN+ = IN− = GND
IN+, IN−
−30
−100 −30
0.10
−10 ±1
−10 ±1
−20
3
3.9
100
3
Max
Units
0
mV
mV
2.35
V
+10
μA
+10
μA
+20
μA
4.4
mA
Ω
pF
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified (such as V_ID).
(2) All typicals are given for: V_DD = +3.3V and T_A = +25°C.
2
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS90LT012AQ